Select the offers that interest you. Just click on 
(20 max).
You can compare up to 4 offers and save your selection.
(20 max).You can compare up to 4 offers and save your selection.
Home >
Pulp & Paper Machinery
> PULP Mill > Pulpers, Wet lap, Pulp dryers
> 1 Andritz 2400mm, Wet Lap Machine , 120-150 tons b.d./day
Back
Back
1 Andritz
2400mm, Wet Lap Machine , 120-150 tons b.d./day
Photos
(9)
(9)
| REF. | 58713-W2 |
| BRAND | Andritz |
| Width ( Inch, mm ) | 2400mm WI |
| Type | Wet Lap Machine |
| Capacity ( TPD ) | 120-150 tons b.d./day TPD |
| YEAR | 1983 |
| QUANTITY | 1 |
| LOCATION | EUROPE Western and Northern |
| DATE | 10 Nov. 2008 |
| 2400mm, Wet Lap Machine , 120-150 tons b.d./day Used Wet Lap Machine Andritz 2400mm Manufacturer ANDRITZ Year 1983 Supplier ANDRITZ Build 1983 Capacity 120-150 tons b.d./day Width of machine 2 400 mm Output measures of bale 2 x 1 200 mm x 800 mm Dryness – outcome 35 - 42 % Operating speed 26 m/min Max. speed 31 m/min Drives on the right in the machine flow Description: Double wire machine with press section, cutter and stacking on pallets. Detail specification: Machine speed 26 m/min Mixing pump Supplier ANDRITZ Headbox closed Position Between top and bottom wire Consistency in headbox 1,3 – 1,5 % Pressure in headbox 20 – 30 kPa Wire part Double wires Dewatering elements Registration rolls 18 + 5 rolls on the top wire 18 + 4 rolls on the bottom wire Wire press rolls three nips Totally 6 pressure rolls Tensioning of wires – specification Tensioning roll Tension top wire 60 N/cm Tension bottom wire 60 N/cm Clothing – specification Wire 2,55 x 15,65 m Type non seamed Mark Unopress 1005 A 0S – Gewebe Nr. 5 cm Supplier Oberdorfer Guiding system top and bottom Drive on the driving roll of bottom wire Press part Prepress one nip, 2 rolls Pressure 0,5 MPa Press one nip, 2 rolls Pressure 0,47 MPa Drive on the bottom press roll Clothing - specification Felts top and bottom Measures 2,65 x 8,3 m Supplier Huyck Type Nr. 300240 Guiding rolls 5 + 5 pcs Transport belts from press part to the cutter Transport roll Vacuum pump 2 pcs Underpressure 0,02 up to 0,06 MPa Cutting machine Measures for Euro pallet format 2 x 1 200 mm x 800 mm Stacker Type with lifting for loading pallets Conveyer For outcome of full pallets Time of stack table lifting 30 s Drives of wet lap machine AC 660 V, frequency changer Motors 2 x 40 kW 1 x 14 kW Control desk Needed parameters for the other sources Pressure air 0,5 MPa Pressure air for instrumentation 0,2 MPa Cold water 0,25 MPa Warm water 0,4 MPa Cooling air for motors max. 80 °C |
Experts to assist you:
. Negotiation. Dismantling / installation
. Storage
. Freight
. Customs formalities
