1 Andritz, Fiberprep

De-inking Recycle Plant Equipment , 120 TPD

Photos

(8)

More information ?


	Other Pulp Deinking / Screening/ Flotation/ Washing/ Dispersion

	Other Andritz Other Fiberprep


	Print

	Send to a friend

REF.	57435-W2
BRAND	Andritz, Fiberprep
Type	De-inking Recycle Plant Equipment
Capacity ( TPD )	120 TPD TPD
YEAR	1994
QUANTITY	1
LOCATION	AMERICA North (USA-Canada-Mexico)
DATE	27 Oct. 2008

De-inking Recycle Plant Equipment , 120 TPD

Andritz / Fiberprep 1994, 400TPD De-inking Used Recycle Plant Equipment

1- High Density Pulper Feed System
This feed system receive recycled paper bales from lift trucks, provide live storage, dewire the bales and deliver material to a pulper via a chain driven belt conveyor.
Technical and performance data:
Maximum bales size: 50'' wide X 80'' long X 52'' high, 2700 lbs
Bales used by mill: 42'' wide X 36'' high X 84', length, 1500 lbs
Feed capacity: 20/30 bales/hour, 425 ad/day, Dewiring cycle time : 1 min. max.
Include: infeed conveyor - 24.16' long X 72'' width
Discharge conveyor - 72'' long X 72'' width
Weigh conveyor- 50' flat on 1st section, 18' with, 25° inclination up feed and 8' flat, is include with this conveyor a load leveller system.
2- High Density, Helico Pulper by Fiberprep,
Model: Hp 60m³, Capacity: 60m³ (197 Ft³)
Dimension: 211'' dia (5359 mm) X 144'' high (3658mm), 24'' dia outlet pulp
Rotor High: 86.'6'' (2200mm), reducer: Falk, model 527ZB X 25,
Motor: 1250 Hp, 1160 Rpm, 2300V
Weight: Pulper: 30 000 lbs, rotor: 9 925 lbs, gear unit: 9 500 lbs
Material: SS316L
3- Scavenger Fiberprep, Model: SJB 4 FAB

4- Vertical fine and acid primary pressure screen, by Fiberprep Model SPM 1500,
Pressure: 60 Psi, 0.2mm slot bascket, mechanical seal Durametallic
Pulley driven operating weight: 41,500 lbs, Motor: 250 Hp, 900 Rpm
Drive pulley: 14'' dia., driven pulley: 59.4'' dia. Belt Model 8 X 8V-2650
Dimension: 20'' feed inlet X 20'' accept X 8'' reject.
5- Vertical fine and acid secondary pressure screen, by Fiberprep Model SPM 800,
Pressure: 60 Psi, 0.2mm slot basket, mechanical seal Durametallic
Drive pulley: 5V-10.3'' dia, driven pulley: 5V-23.6'' dia., Belt Model: 7 X 5V1500
Operating Weight: 7660 lbs, motor: 75 Hp, 885 Rpm, 575V, 444T
Dimension: 10'' inlet X 10'' accept X 6'' reject.
6- Vertical fine and acid tertiary pressure screen, by Fiberprep Model SPM 600
Rotor 5 foil, 0.2mm slotted basket, mechanical seal Durametallic
Belt Model: 5V-1250
7- At the end of the double wire press. Shredder Conveyor # 1, 316 SS, attach to the double wire press
Shredder Conveyor # 2, 316 SS, attach to the double wire press
Outlet Conveyor of Dwp, dimension is about 24'' dia. X 103.44'' long.
They both come with gear reducer and motor 575V.
8- Double Wire Press, built by Andritz
Model:DWP 2024 PLX, 2.0 m wire width
Type of stock: 70% news and 30% OMG
Production Rate: 150 3DMT/D
Inlet Consistency DWP: 4.5% BD
Discharge Consis.DWP: 30-35% BD
Freeness: 100-120ml CS
Stock Temps: 110° - 115°F min.
Stock PH: 4 @ 7
Basis Weight: 2150 g/m²
ASH Content: 5-6%
Design Speed: 85 Fpm
Recommended Speed Range: 36-120 Fpm
Double Wire Press (Next)
Nip Loading: 1st Nip= 300 Pli Drive Nip=800 Pli
Water Consumption:1 Spray Top Shower= 55 gpm @120 Psi
1 Spray Lower Shower= 55 gpm @120 Psi
1 Flush Connection Head Box=21 gpm @ 45 Psi
Air Consumption: Tracking Devices= 3 Cfm @ 60 Psi
Wire Tensioning= 3Cfm @ 60 Psi
Press Nips= 4 Cfm @ 60 Psi
Dimension Over All: 359" long X 150" High X 240" Width with drive.
9- Andritz, Steam Conveyor, Model : 4830STMG, Dimension: 48" Dia X 30’ Long 10- 2x Volcano Boiler, Model : BF-600L-W8GL, Year : 1994 Dimension : 153.38pi3, Capacity : 25 200 000BTU/Hrs Gaz fedd :Natural Gaz
11- Pulp refiner, Sprout-Waldron, Model: 41-2B
/

Last featured products in the same category Pulp Deinking / Screening/ Flotation/ Washing/ Dispersion