1 Beloit

2.28 meter (90 inch), Trim coating system- incl. coating kitchen, supercalender, slitter-rewinder and spare rolls.

Photos

(4)

More information ?


	Other Coating, Laminating, Embossing

	Other Beloit


	Print

	Send to a friend

REF.	46026
BRAND	Beloit
Width ( Inch, mm )	2.28 meter (90 inch) WI
Type	Trim coating system- incl. coating kitchen, supercalender, slitter-rewinder and spare rolls.
YEAR
QUANTITY	1
LOCATION	AMERICA North (USA-Canada-Mexico)
DATE	23 Jun. 2008

2.28 meter (90 inch), Trim coating system- incl. coating kitchen, supercalender, slitter-rewinder and spare rolls.

Used 2.28 meter (90 inch) trim coating system –
including coating kitchen, supercalender, slitter-rewinder and spare rolls.

Off machine coater includes unwind and splicer, 2 Flooded Nip blade coating stations for beveled or bent blade coating, rod coater, IR and air cap dryers, brush calenders and pope reel.

Auxiliaries include coating kitchen, 9-roll supercalender and slitter-rewinder.
This coater can apply up to 20 gsm/side and can be used to make a wide variety of coated products.
It has made grades ranging from coated ink jet and offset papers to coated board.
Currently configured for 610 m/min (2,000 fpm) but could be speeded up.
This system includes all of the major equipment needed to produce a wide variety of coated products.

Included are:
bullet Beloit cartridge type unwind that can use either reels or rolls with 6.84 HP motor
bullet Beloit auto-splicer
bullet Web guide
bullet Single nip pull stack for tension control into first coater
bullet Mount Hope roll
bullet First coater – Beloit Flooded Nip blade coater with 36-inch diameter backing roll and 12-inch diameter applicator roll; stainless steel coating pan, blade beam with air-tube blade loading and capability to run either beveled or bent blade
bullet First coater dryers – Two 60-inch diameter steam cylinders, with air cap on the second cylinder
bullet Pull stack
bullet Mount Hope roll
bullet Second coater – Beloit Flooded Nip blade coater with 36-inc diameter backing roll and 12-inch diameter applicator roll; stainless steel coating pan, blade beam with air-tube blade loading and capability to run either beveled or bent blade
bullet Second coater dryers – Three 60-inch diameter steam cylinders, with air cap on the first cylinder
bullet Pull stack
bullet Meyer Rod coater – can be used for either double coating or curl control on C1S
bullet Infrared dryers – four rows of Maxon gas-fired infrared dryers
bullet In-line single nip finishing calender
bullet In-line brush calender
bullet Pope reel with 36-inch diameter drum
bullet Line shaft coater drive with 150 HP GE motor prime mover
bullet All framing and structures
bullet Controls are pneumatic and relay logic
bullet Slitter-rewinder: Langston two-drum winder with pneumatic brake for tension control
bullet Appleton 9-Roll Supercalender: Maximum speed 2,000 FPM. One chilled iron top roll (24 inch diameter by 97 inch face), four fiber rolls (16 inch diameter by 96 inch face), three chilled iron intermediate rolls (11 inch diameter by 97 inch face) and one chilled iron bottom king roll (28 inch diameter by 97 inch face).
bullet Spare rolls, reel spools and core shafts:
bullet 2 spare coater backing rolls
bullet 2 spare coater applicator rolls
bullet 2 spare Fiberglas-covered paper carrying rolls
bullet 1 spare rubber-covered top roll for in-line calender
bullet 8 spare filled rolls for supercalender
bullet 14 reel spools
bullet 3 expandable-type core shafts
bullet Coating kitchen
bullet Three 1.05-meter diameter by 1.3-meter high dispersion tanks with 75 HP open rotor disperser agitators
bullet Starch/protein/polyvinyl alcohol cooking tank 1.5-meter diameter by 1.8-meter high with 7,5 HP agitator and steam heating system
bullet Two coating storage tanks
bullet Pumps and stainless steel piping for coater and coating preparation system

Last featured products in the same category Coating, Laminating, Embossing