1 IMS

4010, 10-inch Horizontal Dredger

Photos

(4)

More information ?


	Other Other Vessels / Landing craft / Reefer Ship / Dredger

	Other IMS


	Print

	Send to a friend

REF.	637295-W10
CLASS	Used
BRAND	IMS
Model	4010
Short description	10-inch Horizontal Dredger
YEAR
QUANTITY	1
LOCATION	Seller or Machines location: AMERICA North (USA-Canada-Mexico)
LAST CHECK	08 Apr. 2013
PRICE	$ 138,000

4010, 10-inch Horizontal Dredger

10-INCH HORIZONTAL DREDGER

Specifications
- This Dredge is fully operational and ready to work
- It has a new dredge pump shell, and the pontoons are in very good condition
- The engine was replaced with a new engine (not rebuilt),
and it has about 2,500 total runtime hours on it
- The Price includes about 2,500-feet of 10-inch
HDPE (plastic) pipe, mixed SDR 26 and SDR 17 rating

Principal Dimensions and Characteristics
- Length Over All: 11.7 m 38.6 feet
- Width: 2.9 m 9.7 feet
- Height: 2.8 m 9.4 feet
- Weight: 9,979 kg 22,000 lbs

Flotation
- Pontoons (2): 889 x 965 x 7,848 mm 35 x 38 x 309 inches
- 10 ga. steel sides and bottom w/ 1/4" diamond deck
- internal bulkheads and stiffeners
- coal tar based
- TNEMEC paint on the outside.
- Displacement: 10,160 kg 22,400 lbs

Dredging Capacity
- Cut (wide x deep): 2,438 x 559 mm 96 x 22 inches
- Dredging Depth: 6.1 m 20 feet

Main Engine
- Make/Model: Cummins
- Power: 132 kW 177 hp
- Runtime Hours: 2,500 total runtime hours

Hydraulic System
- Circuit #1: Slurry Pump
- 4.6 in³/rev.
- 45 gpm (2.84 liter/sec.) @ 5,500 psig
- Circuit #2: Cutter head, Boom, Winches and Starwheels
- 6.0 in³/rev. load sense
- 59 gpm (3.72 liter/sec.) @ 2,500 psig
- Reservoir: 454 liters 120 gallons
- Filtration: 2 tank mounted return filters with a 10-micron rating and indicator
- suction filter for the slurry pump circuit 3-micron rating and indicator
- filter with water removal capability are optional

Cutter Head
- Cutter bar (diameter x length): 559 x 2,438 mm 22 x 96 inches
- Replaceable hardened steel excavator blades
available with paddlebar for materials that are not easily slurried
- Drive: Recessed dual hydraulic motor
- direct drive with no gear reduction
- Speed: Variable to 90 rpm @ 2,500 psi
- Torque: 12,960 in-lbs. (1,475 N-m) @ 2,500 psi

Dredge Pump
- Make/Model: IMS
- Discharge Diameter: 254 mm 10 inches
- Suction Diameter: 254 mm 10 inches
- Impeller Diameter: 495 mm 19.5 inches
- Sphere Passage: 152 mm 6.0 inches
- Pump Performance: 3,000 gpm
(189 liter/sec) @ 70 ft. (21,3 m) TDH (water) @ 1,180 rpm

Controls
- Electronic joystick controls are provided in a heated, air-conditioned cab

Propulsion
- Starwheel Drive self-propulsion (patented)
- Secondary Propulsion: Is set up for optional cable rigging in lined ponds

Electrical System
- Voltage: 12 volt, negative ground
- Alternator Output: 130 Amp

Last featured products in the same category Other Vessels / Landing craft / Reefer Ship / Dredger