1 Others

Inspection and packaging machine

Photos (1)

More information ?


	Other Packing equipment

	Other Others


	Print

	Send to a friend

REF.	47798-W1
BRAND	Others
Short description	Inspection and packaging machine
YEAR	1998
QUANTITY	1
LOCATION	EUROPE Western and Northern
DATE	12 Jul. 2008

Inspection and packaging machine

Brand: Franco Lazzati
DISTRIBUTION AND PACKING ROLLS COMPUTER PLANT COMPLETE WITH INSPECTION ROLLING MEASURING MACHINE MOD. LAFRA IA – dwg. 6699/A – picture enclosed

A - Cloth inlet

From big rolls Ø 200 cm. about (by tangential unwinder with compensation dandy roll)
From small rolls Ø 40 cm. about (by load bearing supports longitudinally adjustable)

B – Inspection machine

Made by a table in formica with frozen crystal lighted inside; the inclination of the table is 30°.
Neon lamps are also present up the table to obtain best transparency on the cloth.

C – Faults marker

Labeltex system with expulsion of the coloured label that goes out from the selvedge for half of his length.

D – Measuring

It is made by an electronic system by encoder with luminous LED visualizer inserted in the command panel in comfortable position for the operator.
This system by pre selection stops the machine at the pre established meter and it gives also a continuous measuring in mt. and dm.

E – Rolling and selvedges alignment

Tangential type with winding of the cloth by the automatic insertion of the carton tube among two rubberised cylinders.
A different speed between two winding cylinders allows to adjust the hardness of the rolls.
A special photoelectric system of proportional type permit the perfect alignment of the selvedges.
This system is original German made Erhardt + Leimer

F – Driven extension roller at mobiles shooks

To obtain a rolling without plies for every kind of cloth it is applied a shook cylinder that, rolling in the sense of cloth, ply it uniformly without deformation.

G – Automatic starting

One hopper take tubes leave automatically falling down every time the carton tube for the synchronised winding of the cloth that it automatically filled in winding for adhesion the tube.

H – Automatic expulsion

The cloth, at the end of the rolling phase, it is expulsed by a bar put under the two winding cylinders; it is assembled on hydraulic pistons and it is lifted up softly moving the roll at the external side (on other two rolling cylinders)

I – Automatic cutting

At their point a pneumatic cutting system will start and it will make the longitudinal cut of the piece with maximum precision and it will come back in the starting position.

L – Automatic taping system

Always with automatic cycle two disposals will go down which will put at the lateral side of the roll one turn of adhesive tape (of every type and dimension), after this the roll will be put on a moving tape which will take it in to the packing system.
The diameter of the rolls can be variable from 150 to 400 mm. without any regulation at the taping systems.
The moving of the taping systems is motorised and independent in the way to permit the application of the adhesive tape where the operator thinks better.

M – Transporting tape

A line made of transporting tape (10 m about) and also a special point of store for grey cloth (4 m. about) will put all the rolls in the packing system.

N – Automatic packing system

The rolls of cloth will enter in the packing system that, with synchronism completely automatic, will make the packing in polyethylene with longitudinal closing and lateral of the roll.
The lateral closing is foreseen with ultrasounds.

O – Automatic labelling

On one side of the roll it will be put a label (always in sequence completely automatic) on which it will be written all what the operator has digited on the keyboard; for example: customer, colour, meter, lot, etc.
Another label will be put after the packing system following your specific needs with possibility to take off a part of it.

P – Fifth wheel positioning

At the exit of the packing system, every roll will be positioned by transporting tape on a turning fifth wheel that will put them on other two special moving tapes to discharge the rolls in 2 special boxes.

Q – Discharge with automatic going down of the boxes

The packed rolls will be discharged in two different boxes (one for grey cloth, one for finished cloth) by an oleodynamic system with soft going down and programmed till the filling of each box.

R – Technical data

Running speed: 0/120 m/min.
Total electric power: KW 10
Weight: kg. 8000
Compressed air: 8 bar
Tension: 380V three phase

S - Norms against the accidents.

The machine is completely made according to the present norms against the accidents.

Last featured products in the same category Packing equipment