Select the offers that interest you. Just click on 
(20 max).
You can compare up to 4 offers and save your selection.
(20 max).You can compare up to 4 offers and save your selection.
Home >
Pulp & Paper Machinery
> PAPER MACHINE Complete > PM Lightweight/ Tissue/ Crepe/ Cigarette paper
> 1 OverMeccanica Complete Tissue Paper Plant in full Operation, 60 TPD , 2710 mm at pope, 15-29 gr/m2
Back
Back
1 OverMeccanica
Complete Tissue Paper Plant in full Operation, 60 TPD , 2710 mm at pope, 15-29 gr/m2
| REF. | 58061-W2 |
| BRAND | OverMeccanica |
| Type | Complete Tissue Paper Plant in full Operation, 60 TPD |
| Width ( Inch, mm ) | 2710 mm at pope WI |
| Gramages range ( GSM ) | 15-29 gr/m2 |
| YEAR | 1986, 1995, 2005 |
| QUANTITY | 1 |
| LOCATION | EUROPE Western and Northern |
| DATE | 03 Nov. 2008 |
| Complete Tissue Paper Plant in full Operation, 60 TPD , 2710 mm at pope, 15-29 gr/m2 Used Complete Tissue Paper Plant in full Operation - Line B From pulper to rewinder Capacity: 60 Tpd: 15-29 gr/m2 at pope Trim: 2710 mm at pope Speed: 850 m/min at pope winder; 950 m/min at Yankee cylinder Tissue Paper Machine Year of make: 1986 Turo fan pump for 30.000 lt/min Hydraulic headbox made by Over Meccanica Inclined wire forming section, completely overhauled in 2005 Yankee cylinder Ø 2500 mm, face 3000 mm, working pressure 10 bars, grooved inside, new installed January 2005 Blind drilled press Ø 650 mm. Motor 135 Kw, 2500 rpm, 1 spare motor Gas heated hood (450°C), installed in 2003 Beltronix QCS for grammage and moisture Pope winder, motor 24 Kw, 2630 rpm, + spare motor Right hand DC sectional drive, main motor 307 Kw, 1820 rpm, 1 spare motor Stock Preparation for virgin pulp 20 m3 low consistency pulper, year 2004, 200 Kw, stainless steel, with 1 spare motor. Pulley and belts transmission Second small pulper for brokes 2 high density cleaners for 35 Tpd each Comer separplast year 2007, capacity 80 Tpd, 50 Kw motor RCM Separplast, capacity 40 Tpd, 40 Kw motor Toscotec vibrating screen, year 1995 Over Meccanica vibrating screen, year 1990 N°3 stainless steel chests with agitators, 1 x 60 m3, 1 x 40 m3, 1 x 20 m3. Constructor S.T. 1 x 17" Recard DD refiner, with 132 Kw motor year 2008 1 Pilao 17" DD refiner with 132 Kw motor + 1 spare motor Celli deflaker Mod. D5 with 30 Kw motor, 3000 rpm Toschi pressure screen before head box, with 1,8 mm holes Ancillary Equipment Toschi duplicating rewinder for 3 ply tissue, max speed 800 m/min, year 1995 New HST PE wrapping line, installed January 2007 Bono boiler for 5 tons/hr of steam at 12 bar for heating the Yankee cylinder - Gas fuel Krofta flotator for fibre recovery and water cleaning type Supercell 24, year 2004, for 200 m3/h Electric - pneumatic - lubricating - cranes, fork lift trucks, etc. The line was installed in 1986; since then always updated and improved Video available upon request to the seller |
Experts to assist you:
. Negotiation. Dismantling / installation
. Storage
. Freight
. Customs formalities
