1 Valmet

PAPER MACHINE , 90'' (2.30M), KRAFT LINER GRADES

More information ?


	Other PAPER MACHINE complete

	Other Valmet


	Print

	Send to a friend

REF.	42670
BRAND	Valmet
Type	PAPER MACHINE
Width ( Inch, mm )	90" (2.30M) WI
Gramages range ( GSM )	KRAFT LINER GRADES
YEAR
QUANTITY	1
LOCATION	AMERICA North (USA-Canada-Mexico)
DATE	05 May. 2008

PAPER MACHINE , 90'' (2.30M), KRAFT LINER GRADES

Used 90" (2.30M) WIDE EMUA-VALMET PAPER MACHINE KRAF

USED 2.3M WIDE BY 2.0M TRIM EMUA-VALMET FOURDRINIER PAPER MACHINE FOR KRAFT LINER GRADES.
SINGLE WIRE ARRANGEMENT DRIVEN BY CONTINUOUS CURRENT LINE SHAFT DRIVE. WET END IS COMPRISED OF A GOROSTIDI FORMING TABLE
WITH A VALMET PRESSURIZED HEADBOX WITH A 2.OM WIDE POND.
FORMATION CLOTH IS 16M LONG BY 2300MM. WIDE WITH 10 EACH PLAIN SUCTION BOXES.

TWO SECTION PRESS COMPRISED OF 2 NIPS WITH A COMMON INFERIOR CLOTH FOR BOTH NIP (TANDEM) AND A SUPERIOR CLOTH LOCATED IN THE SECOND PRESS.
- THE FIRST PRESS WITH ROLLER INFERIOR SUCTION BY EMUA RUBBER COVERED WITH DIAMETER OF 630MM BLIND DRILLED AT 1970MM.
THE SECOND ROLL IS A MICROROCK AT 470MM DIAMETER AND 2050MM.
- THE SECOND PRESS WITH INFERIOR ROLLER WITH HARD COVERED MICROROCK WITH DIAMETER OF 500MM BY 2050MM WIDE.
THE SUPERIOR ROLL IS RUBBER COVERED WITH A 500MM DIAMETER BY 2050MM AT A HARDNESS OF 90 SHºA.

- 4 SECTIONAL DRYING ARRANGMENT.
FIRST GROUP CONSISTING OF 6 EACH DRYING CYLINDERS AT 1500MM DIAMETER BY 2300MM WIDE.
- SECOND GROUP COMPRISED OF 7 EACH DRYING CYLINDERS AT 1200MM DIAMETER BY 2130MM WIDE.
- THIRD GROUP CONSISTING OF 10 EACH DRYING CYLINDERS AT 1200MM DIAMETER BY 2130MM WIDE.
- FOURTH AND FINAL GROUP COMPRISED OF 2 COOLING CYLINDERS OF 1200MM DIAMETER BY 2030MM WIDE EADH. BOTH, COPPER COVERED. - CENTRALIZED LUBRICATION STATION FOR OIL WITH NET FEEDING PIPES AND RETURN AND ROTAMETERS FOR EACH BEARING OF THE DRYING CYLINDERS. DIRECT LUBRICATION SYSTEM.
EACH CYLINDER RETROFITTED WITH JOHNSON ROTATIONAL STEAM JOINTS TYPE 3550-SB AT 2.5” WITH STEAM TRAPS.
- THE DRYING AREA INCLUDES A RECONDITIONED HOOD WHICH HAS A HOT AIR INJECTION SYSTEM REGULATED BY TWO INDIVIDUAL HEAT EXCHANGERS TO RECOVER AND RECIRCULATE STEAM AND ENERGY AT 9 BAR PRESSURE. NEW IN 1988.
TWO CIRCULATION FANS FOR HEATING NEW IN 1979, AT 32,000 [M3/HR] AND 1200 RPM. - 2.1M WIDE POPE REELER WITH A 700MM DRUM OF DIAMETER WITH 16 INDIVIDUAL REEL SPOOLS. - MAIN DRIVE OF THE MACHINE IS BY A CONTINUOUS MOTOR INDAR AT 500V AND 1200RPM WITH A TOKA RESERVE MOTOR, CONTINUOUS CURRENT AT 315KW AND 4000RPM.
BASMENT:
- 1 NASH CL-701 VACUUM PUMP FOR THE PLAIN SUCTION BOXES ON THE TABLE.
- 1 VME 34, CONNECTED TO THE PRESS SUCTION (FIRST PRESS)
- 1 NASH CL-2002 TO SIPHON THE UHLE BOX, PRESS
- 1 NASH CL-2001 CONNECTED TO THE SUCTION COUCH ROLL.
- 1 FAN PUMP, CONNECTED TO BOXES OF EMPTY FIRST FLOOR OF FORMATION.
- BRUDERHAUS REWINDER TYPE RS-4121, N°25-577, NEW IN 1974, DRIVEN BY BBC CONTINUOUS CURRENT GENSET (OLD STYLE) FEEDING 2 MOTORS OF 45 KW EACH ONE, COUPLED TO ROLLERS AMBLES IN INDEPENDENT FORM.
- VARIOUS MOTOR AND PUMPS FOR WATER THICK STOCK PROCESS RANGING FROM 10HP - 90HP.
- OVERHEARD BRIDGE CRANE 5 TON CAPACITY. - ONE 3 NIP CALENDER, OUT OF SERVICE

Last featured products in the same category PAPER MACHINE complete