Mori Seiki

-, 5,000, NT3200DCG/1000SZ, 4, -


Sorry, this offer is no longer available on Wotol
REF. 491827-W3
CLASS Used
BRAND Mori Seiki
Controller -
Spindle Speed 5,000
Model NT3200DCG/1000SZ
Axis 4
Type -
YEAR 2006
QUANTITY
LOCATION Seller or Machines location:
AMERICA North (USA-Canada-Mexico)
LAST CHECK 27 Aug. 2012
-, 5,000, NT3200DCG/1000SZ, 4, -

SPECIFICATIONS:
WORKING RANGE:

MAX. SWING OF WORKPIECE: MM (IN.) 600 (23.6)
SWING OVER CROSS SLIDE:
- STANDARD: MM (IN.) 600 (23.6)
- TURRET 2: MM (IN.) 340 (13.4)
MAX. DISTANCE BETWEEN CENTERS: MM (IN.) 1,255 (49.4)
MAX. TURNING DIAMETER:
- TOOL SPINDLE MM (IN.) 600 (23.6)
- TURRET 2 MM (IN.) 210 (8.2)

MAX. TURNING LENGTH: MM (IN.) 971 (38.2)
TOOL SPINDLE TRAVEL:
- X-AXIS MM (IN.) 685 (27.0)
- Z-AXIS MM (IN.) 1,075 (42.3)
- Y-AXIS MM (IN.) ± 125 (± 4.9)
- B-AXIS ° ± 120

TURRET 2 TRAVEL:
- X-AXIS MM (IN.) 130 (5.1)
- Z-AXIS MM (IN.) 970 (38.2)

SPINDLE 1
MAX. SPINDLE SPEED: MIN-1 5,000
NUMBER OF SPINDLE SPEED RANGES: 2
SPINDLE 1 DRIVE MOTOR <30 MIN/CONT>
KW (HP) 25/22 (33.3/30)
SPINDLE TORQUE <15% ED/25% ED/30 MIN/CONT>
NM (FTLBF)
358/301/231/214 (264/222/170.4/157.8)

BAR WORK CAPACITY: MM (IN.) 65 (2.6)
THROUGH-SPINDLE HOLE DIAMETER: MM (IN.) 73 (2.9)
SPINDLE BEARING INNER DIAMETER: MM (IN.) 120 (4.7)
TYPE OF SPINDLE NOSE JIS: A2-6
MIN. SPINDLE INDEXING INCREMENT: °0.0001

SPINDLE 2:
MAX. SPINDLE SPEED: MIN-1 5,000
NUMBER OF SPINDLE SPEED RANGES: 2
SPINDLE 2: DRIVE MOTOR <30 MIN/CONT>
KW (HP) 25/22 (33.3/30)
SPINDLE TORQUE <15% ED/25% ED/30 MIN/CONT>
NM (FTLBF)
358/301/231/214 (264/222/170.4/157.8)

BAR WORK CAPACITY: MM (IN.) 65 (2.6)
THROUGH-SPINDLE HOLE DIAMETER: MM (IN.) 73 (2.9)
SPINDLE BEARING INNER DIAMETER: MM (IN.) 120 (4.7)
TYPE OF SPINDLE NOSE JIS: A2-6
MIN. SPINDLE INDEXING INCREMENT:°0.0001

FEEDRATE
TOOL SPINDLE RAPID TRAVERSE RATE:
- X-AXIS: MM/MIN (IPM) 50,000 (1,968.5)
- Z-AXIS: MM/MIN (IPM) 50,000 (1,968.5)
- Y-AXIS: MM/MIN (IPM) 30,000 (1,181.1)
- B-AXIS: MIN-1 40 [100]
TURRET 2:
- X-AXIS: MM/MIN (IPM) 30,000 (1,181.1)
- Z-AXIS: MM/MIN (IPM) 30,000 (1,181.1)
ZS-AXIS RAPID TRAVERSE RATE : MM/MIN (IPM) 30,000 (1,181.1)
C-AXIS RAPID TRAVERSE RATE: MIN-1250
TOOL SPINDLE FEED MOTOR:
- X-AXIS: KW (HP) 5.5 (7.5)
- Z-AXIS: KW (HP) 4.5 (6.0)
- Y-AXIS: KW (HP) 4.5 (6.0)
- B-AXIS: KW (HP) 2.5 (3.4)
TURRET 2 FEED MOTOR:
- X-AXIS: KW (HP) 2.7 (3.6)
- Z-AXIS: KW (HP) 4.0 (5.3)
ZS-AXIS FEED MOTOR
KW (HP) 4.0 (5.3)

TOOL SPINDLE
NUMBER OF TOOL STATIONS: 1
TAPER HOLE OF ROTARY TOOL SPINDLE: CAPTO C5 [BT40] [HSK-A50]
INNER DIAMETER OF ROTARY TOOL SPINDLE BEARING: MM (IN.) 65 (2.6)
TOOL STORAGE CAPACITY: 20 [40] [80] [179] [239]
TOOL CHANGING TIME : SEC 1.25
MAX. TOOL DIAMETER:
- WITH ADJACENT TOOLS: MM (IN.) 70 (2.7)
- WITHOUT ADJACENT TOOLS: MM (IN.) 125 (4.9)
MAX. TOOL LENGTH: MM (IN.) 300 (11.8)
MAX. TOOL MASS: KG (LB.) 4 (8.8)
B-AXIS INDEXING TIME <90º ROTATION>:
- STANDARD: SEC 0.65
- OPTION: SEC [0.35]
MIN. B-AXIS INDEXING INCREMENT:
- STANDARD: °1
- OPTION: °[0.0001]
MAX. TOOL SPINDLE SPEED:
- STANDARD: MIN-1 12,000
- OPTION: MIN-1 [20,000]
TOOL SPINDLE DRIVE MOTOR:
- STANDARD <25% ED/CONT>: KW (HP) 5.5/3.7 (7.5/5)
- OPTION <10 MIN/CONT>: KW (HP) [18.5/11 (24.7/15)]
SPINDLE TORQUE:
<10% ED/15% ED/25% ED/CONT>
NM (FTLBF)
49/40.4/29.1/19.6
(36.1/29.8/21.5/14.5)

TURRET 2:
NUMBER OF TOOL STATIONS: 12
NUMBER OF ROTARY TOOLS ON TURRET: [12]
SIZE OF SQUARE TOOL'S SECTION: MM (IN.) 20 X 20 (0.75 X 0.75)
SHANK DIAMETER FOR BORING BAR: MM (IN.) MAX. 32 (1.25)
TURRET INDEXING TIME: SEC 0.2
MAX. ROTARY TOOL SPINDLE SPEED: MIN-1 [6,000]
TURRET 2 ROTARY TOOL SPINDLE DRIVE MOTOR:
<25% ED/CONT>
KW (HP) [5.5/3.7 (7.5/5)]
SPINDLE TORQUE <15% ED/25% ED/CONT> NM (FTLBF)
[16.9/13.1/8.0 (12.5/9.7/5.9)]

DIMENSIONS, MASSES, MISCELLANEOUS:
FLOOR SPACE :
MM (IN.) 4,203 X 2,966 (165.5 X 116.8)
MACHINE HEIGHT :
- STANDARD : MM (IN.) 2,765 (108.9)
- HINGE TYPE: MM (IN.) [2,765 (108.9)]
- HINGE TYPE + SCRAPER TYPE + DRUM FILTER:
MM (IN.) [2,794 (110.0)]
MASS OF MACHINE: KG (LB.) 16,300 (35,860)
COOLANT TANK CAPACITY:
L (GAL.) 698 (184.3)
COOLANT PUMP MOTOR <60 HZ/50 HZ>
KW (HP) 1.210(1.61)/0.730(0.97) X 1
1.040(1.40)/0.635(0.84) X 3
ELECTRICAL POWER SUPPLY : KVA 86.5
COMPRESSED AIR SUPPLY
MPA(PSI), L/MIN(GPM)
0.5 (72.5), 450 (118.8)

CNC UNIT F31IA5
CONTROLLED AXES:
H1: X, Z, C, Y, B, A (S-, SZ-TYPES ONLY)
H2: X, Z, C (S-, SZ-TYPES ONLY)
SIMULTANEOUSLY CONTROLLED AXES H1: X, Z, C, Y, B
H2: X, Z, C (S-, SZ-TYPES ONLY)
CS CONTOUR CONTROL USING FOR TURNING SPINDLE
LEAST INPUT INCREMENT: EXCEPT BC: 0.001 MM (0.0001 IN.), C: 0.0001°, B: FULL INDEXING INCREMENT 0.0001°
MAX. COMMAND VALUE: ±999,999.999 MM (±99,999.9999 IN.)
INCH/METRIC CONVERSION
MACHINE LOCK
CHAMFERING ON/OFF
ABNORMAL LOAD DETECTION

OPERATION
DRY RUN
SINGLE BLOCK
JOG FEEDRATE: 0 - 5,000 MM/MIN (0 - 197.0 IPM)<20 STEPS>
MANUAL ZERO RETURN:
MANUAL PULSE HANDLE FEED
MANUAL PULSE GENERATOR: 1 UNITS
×1, ×10, ×100 (PER PULSE)

INTERPOLATION FUNCTIONS

NANO INTERPOLATION
POSITIONING: LINEAR INTERPOLATION TYPE POSITIONING IS POSSIBLE
EXACT STOP MODE
CYLINDRICAL INTERPOLATION
HELICAL INTERPOLATION CIRCULAR INTERPOLATION AND LINEAR INTERPOLATION (MAX. 2 AXES)
THREAD CUTTING/SYNCHRONOUS FEED
MULTI-START THREAD CUTTING
RETRACT DURING THREAD CUTTING CYCLE
CONTINUOUS THREAD CUTTING
ZERO RETURN
ZERO RETURN CHECK
2ND ZERO RETURN
3RD AND 4TH ZERO RETURN
POLAR COORDINATE INTERPOLATION

FEED FUNCTIONS
RAPID TRAVERSE RATE OVERRIDE F0/1/10/25/100%
FEED PER MINUTE
FEED PER REVOLUTION
CONSTANT TANGENTIAL VELOCITY CONTROL
CUTTING FEEDRATE CLAMP
OPTIMUM TORQUE ACCELERATION/DECELERATION
AUTOMATIC ACCELERATION/DECELERATION: BELL-SHAPED (RAPID TRAVERSE)/
LINEAR TYPE (CUTTING FEED)
FEEDRATE OVERRIDE: 0 - 200% (10% INCREMENTS)
OVERRIDE CANCEL
AI CONTOUR CONTROL I

PROGRAM INPUT:
OPTIONAL BLOCK SKIP: 1 BLOCK
MAX. COMMAND VALUE: ±9 DIGITS
PROGRAM FILE NAME: 32 CHARACTERS
SEQUENCE NUMBER: 5-DIGIT N CODE
ABSOLUTE (INCREMENTAL) PROGRAMMING: X (U), Z (W), C (H), Y (V), B, A (S-, SZ-TYPES ONLY)
DECIMAL POINT PROGRAMMING OR ELECTRONIC CALCULATOR TYPE DECIMAL POINT PROGRAMMING CAN BE SET USING PARAMETERS
DIAMETER/RADIUS PROGRAMMING (X-AXIS)
STANDARD: DIAMETER
PLANE SELECTION
ROTARY AXIS DESIGNATION
ROTARY AXIS ROLL-OVER
COORDINATE SYSTEM SETTING
AUTOMATIC COORDINATE SYSTEM SETTING
WORKPIECE COORDINATE SYSTEM
PROGRAMMABLE DATA INPUT
SUB-PROGRAM CALL UP TO 10 NESTINGS
CUSTOM MACRO
CUSTOM MACRO COMMON VARIABLES: 600 ITEMS (#100 - #199, #500 - #999)
SINGLE REPETITIVE CYCLE
MULTIPLE REPETITIVE CYCLE
MULTIPLE REPETITIVE CYCLE II: POCKET PROFILE, ZIGZAG THREAD CUTTING
HOLE MACHINING CANNED CYCLE
3D COORDINATE CONVERSION
F15 FORMAT
DYNAMIC DIAMETER/RADIUS SWITCHING

MISCELLANEOUS FUNCTIONS/SPINDLE SPEED FUNCTIONS

MISCELLANEOUS FUNCTION: 4-DIGIT M CODE
AUXILIARY FUNCTION LOCK
MULTIPLE MISCELLANEOUS FUNCTION COMMANDS (THIS FUNCTION IS STANDARD FOR THE SPECIFIED M CODES.) 3 COMMANDS
SPINDLE SPEED FUNCTION: 5-DIGIT S CODE
SPINDLE SPEED OVERRIDE: 50 - 150% (10% INCREMENTS)
SPINDLE 1 ORIENTATION
SPINDLE 2 ORIENTATION (S-, SZ-TYPES ONLY)
ROTARY TOOL SPINDLE ORIENTATION
SPINDLE SYNCHRONIZED CONTROL (S-, SZ-TYPES ONLY)
SIMPLIFIED SYNCHRONIZED CONTROL (S-, SZ-TYPES ONLY)
MULTIPLE-SPINDLE CONTROL
SYNCHRONIZED TAPPING: TOOL SPINDLE

TOOL FUNCTIONS/TOOL OFFSET FUNCTIONS:
TOOL FUNCTION: 4-DIGIT T CODE
NUMBER OF TOOL OFFSETS: H1: 240 SETS
H2: 64 SETS
TOOL POSITION OFFSET
Y-AXIS OFFSET
TOOL NOSE RADIUS OFFSET
TOOL GEOMETRY OFFSET/TOOL WEAR OFFSET
TOOL LIFE MANAGEMENT B
NUMBER OF TOOL LIFE MANAGEMENT B SETS: 240 SETS
7-DIGIT TOOL OFFSET DATA
TOOL OFFSET MEASUREMENT DIRECT DATA INPUT
TOOL OFFSET MEASUREMENT DIRECT DATA INPUT B: IN-MACHINE TOOL PRESETTER
CORNER CIRCULAR INTERPOLATION

EDITING
BACKGROUND EDITING
EXPANDED TAPE EDITING: COPY BUFFER: 10 KB
UNDO/REDO FUNCTION (MAPPS)
LINE NUMBER DISPLAY (MAPPS)
PROGRAM PROTECT
TOTAL OF PROGRAM STORAGE CAPACITY: 640 M (2,100 FT) <256 KB>
TOTAL NUMBER OF STORED PROGRAMS: 500

SETTING AND DISPLAY
STATUS DISPLAY
CLOCK FUNCTION
ACTUAL POSITION DISPLAY
PROGRAM COMMENT DISPLAY: 190 CHARACTERS
PARAMETER SETTING DISPLAY
ALARM DISPLAY
ALARM HISTORY DISPLAY
OPERATOR'S MESSAGE HISTORY DISPLAY
OPERATION HISTORY DISPLAY
RUNNING TIME/NUMBER OF PARTS DISPLAY
ACTUAL FEEDRATE DISPLAY
OPERATING MONITOR SCREEN: LOAD METER DISPLAY ETC
HELP FUNCTION
SELF-DIAGNOSIS: INCLUDES ALARM DISPLAY, I/O SIGNAL DIAGNOSIS AND LADDER DIAGRAM
DISPLAY OF ACTUAL SPINDLE SPEED AND T CODE
OPERATION PANEL: DISPLAY SECTION 19-INCH TFT COLOR LCD

DATA INPUT/OUTPUT:
1 GB USER MEMORY AREA (FOR CARD DNC OPERATION, FOR DATA BACKUP) FILES UP TO 10 MB IN SIZE CAN BE EDITED
MEMORY CARD INPUT/OUTPUT
ETHERNET 10/100/1000BASE-T
BUILT-IN ETHERNET FUNCTION NOT SUPPORTED

HIGH-SPEED, HIGH-PRECISION, 5-AXIS MACHINING FUNCTIONS

INTERPOLATION FUNCTIONS
- NANO SMOOTHING G5.1
FEED FUNCTIONS
- AI CONTOUR CONTROL FUNCTION II
PROGRAM INPUT
- TILTED WORKING PLANE COMMAND
- CUTTING POINT COMMAND
TOOL FUNCTIONS/TOOL OFFSET FUNCTIONS
- TOOL CENTER POINT CONTROL
- 3-D CUTTER COMPENSATION
- SVC FUNCTION
- WORKPIECE MOUNTING ERROR COMPENSATION
I/O FUNCTIONS AND UNITS
- FAST DATA SERVER
- MEMORY CARD FOR DATA SERVER


EQUIPPED WITH:

180 TOOL ATC MATRIX CHANGER
IN MACHINE TRAVELING PARTS CATCHER
(2) 8" CHUCKS
480 TOOL OFFSETS
FULL B-AXIS .001 DEGREE FULL CONTOURING
CHIP CONVEYOR SSYTEM
BARFEED INTERFACE
1000 PSI HIGH PRESSURE SYSTEM
TURRET 2 MILLING SPEC UPGRADE
MANUFACTURED IN 12/2006
SOLD NEW IN 2008


Last featured products in the same category CNC Lathes



Last featured products with same brand Mori Seiki


Btn_product_premium2
Bloc_alert
Advertisements
Photo_wotol_service

Boost your business!

We have many services to improve the visibility of your products and your company

Btn_more_details

Register