Ganner DB 21

Dowel drilling machine
fully automatic electronic control with foot valve
clamping - drilling - removing chips, electrical intermittent operation

Automatic return of the drilling unit after reaching the set drilling depth
Automatic borehole depth extension when drilling on the strand side, this saves having
to change the borehole depth from flat-side to front-side drillings

1 drilling beam with 21 spindles, pitch 32 mm, motor 1.5 kW
(Drilling feed 0-70 mm)
Incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits
Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders
1 clamping carrier movable in Y-axis with 3 pneumatic clamping cylinders

Ideal stop system consisting of:
1 Anschall ruler 1800 for drilling intermediate floors
(aluminum profile 40x40 mm) with 3 impact stops, with quick-change system,
can be easily switched from the right to the left side of the stop for mirror-image drilling
of intermediate shelves in carcass constructions, can also be used for rows of holes in System 32

Side stops and position settings as well as the position of the drilling height above the support table using mechanical digital counters
Side stops can be easily swiveled away for the shortest possible conversion from body to frame and hole row drilling
Clamping arms for clamping carriers designed for hole row positions up to 300 mm ideal 3-stage tool system

Suction funnel, dust tested, 120 mm
Kirim masukan
Panel samping
Hasil terjemahan tersedia