Rambaudi RC 270 5 Axis

RAMBAUDI RC 270
YEAR: 2014


CONTROL UNIT
BRAND: HEIDENHAIN

MAIN DRIVE
SPINDLE SPEED RANGE: 24000 RPM 1/MIN
TOOL TAPER: HSK-A63
NUMBER OF AXIS: 5

MOVEMENT
X-AXIS MOVEMENT: 2700 MM
Y-AXIS MOVEMENT: 2200 MM
Z-AXIS MOVEMENT: 1250 MM

Additional Information
MACHINE BENEFITS
TECHNICAL MACHINE BENEFITS:
- X AND X1 = 2200 MM // SPEED: 40 M/1' // LONGITUDINAL TRANSLATION OF THE CROSSBEAM ON 2 COLUMNS
- Y = 2700 MM // SPEED: 40 M/1' // TRANSVERSAL TRANSLATION OF THE RAM HOLDER CROSS SADDLE ON THE CROSSBEAM
- Z = 1250 MM // SPEED: 40 M/1' // VERTICAL TRANSLATION OF TH ERAM ON THE CROSS SADDLE
- C CONTINOUS = 400 (+/- 200 °) // ROTATION OF THE HEAD AROUND THE RAM VERTICAL AXIS
- A CONTINOUS = 230 ° (+ 120 °, -110 °) // ROTATION OF THE ELECTROSPINDLE SUPPORT INSIDE THE HEAD FORK
- PRECISION OF LINEAR MACHINE AXES (X, X1, Y, Z): P = 0. 015 MM / TRANSDUCER OPTICAL LINE
- PRECISION OF POLAR MACHINE AXES (C,A): 15 ARC SEC - REPEATABILITY 10 ARC SEC / TRANSDUCER ENCODER
- TORQUE: C, A CONTINOUS = 1000 NM // C, A BRAKED = 4000 NM
QUALITATIVE MACHINE BENEFITS:
- NUMERIC CONTROL MILLING CENTRE WITH MOVABLE CROSSBEAM, SUITABLE FOR HIGH-SPEED MACHINING WITH 5 AXES
- TWO LATERAL COLUMNS ON WHICH CROSSBEAM RUNS
- A CROSSBEAM THAT SUPPORTS THE RAM HOLDER CROSS SADDLE AND SLIDE ON THE COLUMNS
- A RAM THAT SLIDES VERTICALLY INSIDE THE CROSS SADDLE
- A HEAD FIXED TO THE LOWER PART OF THE RAM
- A WORKING TABLE IN THE CENTER OF THE COLUMNS, WITH THE FOLLOWING CHARACTERISTICS: 2500 X 2000 MM // 10000 KG/M2 // 300 MM THICKNESS OF CAST IRON TABLE // 8 T-SLOTS - WIDTH 28MM
- THE MACHINE IS EQUIPPED WITH A 2-AXIS GLOB 89 G MILLING HEAD (C AND A CONTINOUS)
- INSIDE OF THE HEAD FORKS IS HOUSED THE SPINDLE WITH 24000 RPM, HSK-A 63 TOOL TAPER