Menu

Used Downstream extrusion

205 results
1

Calibration Table Table length 11,2 m nr.2 Water Pumps nr.1 Vacuum Pump Energy saving system GESS.TRONIC Year(s) : 2020 Location : EUROPE (Western and Northern)

Price : On request

More details  
1

System (1= Hand 2. Automatic 3. Auto clean) 2 Max throughput capacity? ( ± kg/hr) 2600 Runned at Ø ? (mm) ex Year(s) : 2007 Location : EUROPE (Western and Northern)

Price : On request

More details  
1

Cal table: Model Gen Cal 2P/4 Age 2002 Connected 27kw Length 500cm Width 110cm Haul off –Saw Combination: Mode Year(s) : 2003 Location : EUROPE (Western and Northern)

Price : On request

More details  
1

1000 mm wide downstream , in very good condition. Saw Cross and Longtitudal saw included. Year(s) : 2003 Location : EUROPE (Western and Northern)

Price : On request

More details  
1

VACUUM SIZING TANK 72” x 6” Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
1

84" Machine Direction orientation unit (MDO) this unit is in storage, ready to go. Year(s) : 1998 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
0

Brand Davis Standard Year of Mfg 1993 Voltage 230V / 3 Ph / 60 Hz Year(s) : 1993 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
4

Contact length caterpillars: 2.300 mm Contact width: 325 mm Opening height: 140 mm Max. profile height: 140 mm Year(s) : 1996 Location : EUROPE (Western and Northern)

Price : On request

More details  
1

Metaplast 25 foot long & 20 foot long Vacuum SS Tank – at least 3 compartments (1 available) Metaplast 20 fo Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
0

Servo Fly Knife Cutter Max OD Profile 4.5" Max OD Bushing 4.5" Power 460/3/60 Amps 19 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
1

8" x 40" CDS Cleated Puller, 3hp 8" Wide x 40" Long Belts, Manual Height Adjustment 3hp Baldor Motor, 1750rpm Year(s) : 2005 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
0

Cut Capacity 2" Belt Contact Length 18" Belt Width 3" Bushing Diameter 2-1/4" Power Supply 480V / 3 Ph / 60 Hz Year(s) : 1998 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
1

Bathtub for Tubes Up to 300mm. Location : AMERICA (Central and South)

Price : On request

More details  
0

ø 4-40 mm Length 2000 mm Year(s) : 1999 Location : EUROPE (Western and Northern)

Price : On request

More details  
0

ø 4-40 mm 2- chamber version Immersion tank Length 2500 mm Year(s) : 1999 Location : EUROPE (Western and Northern)

Price : On request

More details  
1

ø 25-160 mm Contact length 1400 mm Drive:3x 1,5 kW A.C. servodrives Year(s) : 2012 Location : EUROPE (Western and Northern)

Price : On request

More details  
1

Pipes ø 32mm Profile 90 m/min. Max Contact lenght 400 mm, width of belts 80 mm, remote control with 5m cable Year(s) : 2002 Location : EUROPE (Western and Northern)

Price : On request

More details  
1

Range:ø 40-250 mm, central clamping unit Synchronisation of saw carriage via A.C. servodrive, stroke extensio Year(s) : 2014 Location : EUROPE (Western and Northern)

Price : On request

More details  
1

Vacuum tub for cooling tubes and profiles: 4.30x0.30 m wide in stainless steel. With extension: 2.9 m. Location : EUROPE (Western and Northern)

Price : On request

More details  
1

Type of Extrusion Equipment Catepillar Haul-Off Belt Contact Points 4.33" W x 27.55" Long Horsepower 1.47 HP C Year(s) : 2018 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
1

Conair Vacuum Sizing Tank 2 Vacuum Pumps, One Process Pump, Motorized Screw Jack Actuation 2 Plate and Frame Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
1

Haul-off force: approx. 10.000 N Cleat width: 120 mm Effective pressing length: 1100 mm Haul-off speed: approx Year(s) : 1993 Location : EUROPE (Western and Northern)

Price : On request

More details  
1

Type of machine Vacuum tank Pipe outside diameter max. 8” Ø Cooling length 1.000 mm Spray pump kW 2,2 kW Dimen Year(s) : 2005 Location : EUROPE (Western and Northern)

Price : On request

More details  
1

Killion Vacuum Sizer Model DST-PVT3 Approx. 12 Feet Long Portable on wheels Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
0

Width 16" Depth 12" Water Outlets 18 Vacuum Outlets 18 Water Ring 5 HP Process Pump 3 HP Included Inline Filte Year(s) : 2009 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  

You can find used Downstream extrusion on Wotol

The main manufacturers of Downstream extrusion are Vobau, CDS, Battenfeld, Greiner, Cincinnati, Conair, Graewe, Sica, Speedex, Metaplast, Custom, Kuag, RDN, Techno.
The main models are RDN 4D-2V-3T-14, Haul Off, AP-433-G2-280, K 400 V 4/6, ASP-433-D2-240, 417-1800-220, AP418-G2-240, ASPSeries, AP-433-G2-280, 430-600, KKP-333-4-740L, K 400 V 4/6,  AP-433-G2-280, Caterpillar haul off, KKPSeries, ASP-432-G2-240, R500/4E.

HS code 8477 (Machinery for working rubber or plastics or for the manufacture of products from these materials, not specified or included elsewhere in this Chapter. )

HS code 8477 20 20 (For extruding plastics.)

Create an alert
});