Agilent

Agilent 1200 Series G1367C HiP-ALS SL autosampler

Type Specification
GLP features

Communications Early maintenance feedback (EMF), electronic records of maintenance and errors
Controller-area network (CAN). RS232C, APG-remote standard, optional four external contact closures and BCD vial number output
Safety features 0.1 - 5000 µL in 0.1 µL increments. Recommended injection range 10 - 5000 µL
Injection range Max. loop size 5 ml (selectable range: 5 µL - 50000 µL)
Precision Typically < 0.5% RSD (50 µL loop, overfill factor 3 or greater)
Pressure range Typically < 1.0% RSD (5000 µL loop, 1000 µL injection volume, draw/eject speed 20 mL/min)
Sample viscosity range 0.2 – 5 cp
Sample capacity 2 well-plates (96 and 384) plus 10 additional 2-mL vials 108 x 2-mL vials in 2 x 54 vial plate plus 10 additional 2-mL vials 30 x 6-mL vials in 2 x 15 vial plate plus 10 additional 2-mL vials 54 Eppendorf tubes (0.5/1.5/2.0 mL) in 2 x 27 Eppendorf tube plate Vial septa and closing mats must be pre-slit.
Injection cycle time < 0.1% with rinse factor > 3 (see test method listing in manual)
Carry-over Typically < 0.01 % using the following conditions:
Column: 125 x 4 mm Hypersil ODS, 5 µm
Mobile phase: Water/Acetonitrile = 80/20
Flow rate: 1 ml/min
Injection volume: 1 µl caffeine (1 mg/ml), 5 µl water to test carryover
Outside wash of needle before injection: 20 sec with water using flush port

This refurbished Agilent 1200 Series G1367C HiP-ALS SL autosampler is in great condition and is tested.