Used Compounding / Pelletizer / Masterbatch

Extruder Brand Purui Model SJ200/32 Year of Mfg 2018 L/D Ratio 32:1 Screw Diameter 8" Motor 335 HP AC Motor C Year(s) : 2018 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

– Water Cooled Barrel, 11.68 Gearbox Ratio, 400hp Gearbox Capacity with 1.25 Service Factor – 300hp Baldor In Year(s) : 2006 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

150mm Omipa pelletising line with crammer, vented. with screen changer and Filtec under water pelletiser. 80 Year(s) : 1997 Location : EUROPE (Western and Northern)

Price : On request

Underwater pelletizing system. Includes 2 HP cutter with four (4) blade hub, three (3) spare dies, 40 GPM TW Location : AMERICA North (USA-Canada-Mexico)

Price : On request

2.5″ Hartig extruder with a 24:1 L/D four (4) zone electrically heated, air cooled, and non-vented barrel at Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Leistriz 4.29″ (110 mm) Single Screw Pelletizing Line consisting of: (1) Leistriz single screw extruder, type Location : AMERICA North (USA-Canada-Mexico)

Price : On request

PARTLY OVERHAULED AND FUNCTIONALLY YEAR 2021 TO 2022 EREMA TYPE 120 TVE, YEAR 1998, OUTPUT UP TO 850 KG/H DEPE Year(s) : 2021 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Pelletizing System with Spin Dryer Location : AMERICA North (USA-Canada-Mexico)

Price : On request

3.5″ Davis Standard Thermatic Single Screw Extruder 34:1 L/D Vented Barrel Vent Located 78″ from Feed Throat 6 Year(s) : 2008 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

FEEDING SECTION: FROM 10 INCHES DIAMETER DOWN TO 165 MM DIAMETER (CONICAL) GROOVED TYPE GEAR BOX MODEL 165-1 Year(s) : 1990 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Underwater pelletizing system Including die plate, 20 GPM water system and Model 8.1/BF spin dryer. Include Year(s) : 1991 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Underwater pelletizing system. System is good for 700-1000 lbs per hour. the spin dryers are rated for 1500 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Nominal capacity range 850-1250kg/hr depending on feed material, currently with 8505 run hours consisting of Year(s) : 2018 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

6″ NRM Model PM 70 – Strand Pelletizing Line with open vent with pressure gauge and rupture disc. Two Stage Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Water Cooled Barrel, 11.68 Gearbox Ratio, 400hp Gearbox Capacity with 1.25 Service Factor 300hp Baldor Invert Year(s) : 2006 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

RPM 1500 Motor 55 kW Year(s) : 2002 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Width 16" Horsepower 40 HP Voltage 460 Volt 3 Phase 60 Hz Year(s) : 1996 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Horsepower 50 HP Max Strands 150 Working Width 24" Voltage 460 Volt 3 Phase 60 Hz Note Spare Head include Year(s) : 2004 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Width 16" Horsepower 30 HP Voltage 460 Volt 3 Phase 60 Hz Year(s) : 2007 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Width 16" Horsepower 30 HP Voltage 460 Volt 3 Phase 60 Hz Year(s) : 2006 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

4.5inch Prodex Extruder Vented Barrel 24 to 1 Hydraulic Screen Changer with Strand Die 150 HP AC Motor 480 V C Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Extruder - 55MM, 11:1 L/D Ratio 17kw (23 HP) AC Motor and Drive, Electrically Heated, Air Cooled Hot Face Pell Location : AMERICA North (USA-Canada-Mexico)

Price : On request

WATER RING GRANULATOR Type WF 350 / GRO 500 For up to 300/350 kg/h extruders 3 kW drive Die plate with 48 x Ø Location : EUROPE (Western and Northern)

Price : On request

reclying PE PP line Agglomerator. recycling recycle line polymer , plastics , pet , powder, flake ext. Location : MIDDLE EAST

Price : On request

AIR PELLETIZER FOR PVC AND COMPOUNDS for throughput 500 to 1500 kg/h connection flange built on Client's desig Year(s) : 2023 Location : EUROPE (Western and Northern)

Price : On request