Menu

Used Downstream extrusion

248 results
1

20' CDS Vacuum Sizing Tank, 16" Wide 16" Width, 18 Water Outlets, 18 Vacuum Outlets 36" Primary Section, (4) 4 Year(s) : 2009 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
1

Brand Kiwex 20" Width 18 Water Outlets 18 Vacuum Outlets 460 Volt Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
1

30' Vacuum Sizing Tank, Model 18/18 Manifolds 16" Wide x 12" Deep, Plate and Frame Heat Exchanger Circulation Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
1

20' CDS Vacuum Sizing Tank 16" Wide x 12" Deep 16" Width, 18 Water Outlets, 18 Vacuum Outlets, 4 Kw Water Rin Year(s) : 2009 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
0

20' CDS Vacuum Sizing Tank, 16" Wide 16" Width, 18 Water Outlets, 18 Vacuum Outlets 36" Primary Section, (4) 4 Year(s) : 2009 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
1

12" x 12" Cross Section 8" Diameter Bulkhead Openings 2 Spray Bars Per Section 42" +/- 3" Centerline Approx. 4 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
1

16' ESI Spray Annealing Tank, 16" W x 12" D Cross Section 42" Heated Flood Section Missing Temperature Control Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
0

21' Long Conair MCB-21-4 Cooling Tank With Vacuum Manifold 12" X 12" Cross section 7.5 HP Tuthill Vacuum Pump Year(s) : 2010 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
0

Cooling Tank 240V/3HP/60CY Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
1

22' L Vacuum Sizing Tanks, 19" W x 16" H Cross Section 36" L Primary Vacuum Section 38" L x 40" Wide Inspectio Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
0

-12' Long x 26" Wide x 4" Deep -42" Center Line -80 Plate Heat Exchanger -Twin 18 Valve Vacuum/Water Manifold Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
1

Unit rated for 8″ wide x 3.5″ high profiles, 4.5″ high x 4″ wide profiles, and 4.5″ OD pipe. 14″ diameter s Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
1

Profile puller / cutter combination. Belt puller has 2″ wide belts with 11″ of contact length. Servo driven Year(s) : 2019 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
1

Air traveling up-cut profile saw. Unit rated for 8″ wide 3.5″ high profiles, 4.5″ high x 4″ wide profiles, a Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
1

Dual lane cleat type puller. Each puller has 7 ½” wide cleats with 42″ of contact length. Pneumatically act Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
1

Puller/Traveling Saw Combination. 9 1/4″ wide cleats with 96″ belt contact length. Chain driven with dual pn Year(s) : 2004 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
1

Dual lane cleat type puller. Each puller has 7 ½” wide cleats with 42″ of contact length. Pneumatically actua Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
1

Dual lane calibration table. 6′ long. Two ½ hp motors. 460/3/60 input power @ 7 amps. Six (6) position man Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
1

Air traveling up cut profile saw. Unit rated to 13″ wide 3.5″ high profiles, 6″ high x 2.5″ wide profile and Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
1

Having 4 ¼”wide belts with x 21″ long contact area. Belts driven by approximately a 2 HP 230/460-Volt A/C mot Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
1

Nominal 18″ saw blade. Up acting cut with pneumatic hold downs Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
1

Set up for right to left operation. Manufactured in 1992. Includes portable dust collector. Year(s) : 1992 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
1

Utilizes nominal 9 1/4″ wide cleats with 108″ belt contact length. Chain driven with dual pneumatic gap adju Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
1

10′ long consisting of one 8’ and one 2’ compartment. Nominal 10″ x 10″ cross section. Stainless steel const Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
1

Set up for 9 1/4″ wide cleats with 120″ belt contact length. Chain driven with dual pneumatic gap adjustment. Year(s) : 1992 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  

You can find used Downstream extrusion on Wotol

The main manufacturers of Downstream extrusion are Vobau, CDS, Battenfeld, Greiner, Cincinnati, Conair, Graewe, Sica, Speedex, Metaplast, Custom, Kuag, RDN, Techno.
The main models are RDN 4D-2V-3T-14, Haul Off, AP-433-G2-280, K 400 V 4/6, ASP-433-D2-240, 417-1800-220, AP418-G2-240, ASPSeries, AP-433-G2-280, 430-600, KKP-333-4-740L, K 400 V 4/6,  AP-433-G2-280, Caterpillar haul off, KKPSeries, ASP-432-G2-240, R500/4E.

HS code 8477 (Machinery for working rubber or plastics or for the manufacture of products from these materials, not specified or included elsewhere in this Chapter. )

HS code 8477 20 20 (For extruding plastics.)

Create an alert