Used Plastic Machinery
11,700 resultsFind by category
Robot with R8.3 Teachbox Robot Type-No: W843-0367 Robot Control System: Teachbox R8.3 Hub Stroke: X-1200 mm, Y Year(s) : 2012 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsSteering: Procan Operating hours: 42000 hours Technical data on the closing page Closing force: 550 kN Plate Year(s) : 2013 Location : EUROPE (Western and Northern)
Price : On request
More detailsSteering: Procan Construction year: 2008 Operating hours: 59283 h Technical data on the closing page Closing Year(s) : 2008 Location : EUROPE (Western and Northern)
Price : On request
More detailsSteering: Selogica Construction year: 2003 Operating hours: 47000 h Technical data on the closing page Closin Year(s) : 2003 Location : EUROPE (Western and Northern)
Price : On request
More detailsDesiccant wheel dryer, 220/3/60. PM was performed on this machine on 4/3/24 with new filters etc. Good oper Year(s) : 2006 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More details115 volt. This has a self contained loader for the main ingredient, static elimination unit. Unit has been Year(s) : 2020 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsSHOT SIZE 1.69 oz. CLAMP STYLE Toggle PLATEN SIZE 19.6" x 18.5" TIE BAR 14.2" x 12.6" DAYLIGHT Max. 23.62" HKO Year(s) : 1998 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsSHOT SIZE 5.5 oz. CLAMP STYLE Toggle PLATEN SIZE 25.59" x 25.59" TIE BAR 18.11" x 18.11" DAYLIGHT Max 31.5" HK Year(s) : 2015 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsHKO Yes COREPULL Yes SHOT SIZE 122.18 oz. Year(s) : 2004 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsMotor (2) 150 HP Shredding Capacity 32" Diameter / 20' Length Gearbox Direct Drive Material PVC or HDPE Includ Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsRotor Diameter 12.6" Rotor Width 16.5" Rotor Knives 3 Bed Knives 1 Motor 30 HP Throughput ~ 750 lbs/h Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsHorsepower 2 HP Voltage 230V / 1 Phase Comes With Additional Rotary Helical Gear Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsTwo Colour Plastic Injection Moulding Machine Model DC120 Location : ASIA (China - Taiwan - HKG)
Price : On request
More detailsScrew diameter : 46mm Injection speed : 240mm/sec Shot volume : 349cm3 Clamping force : 280 T Distance between Year(s) : 2006 Location : ASIA (China - Taiwan - HKG)
Price : On request
More detailsScrew diameter : 110mm Clamping force : 1300 T Distance between tie bars : 1400 x 1400mm Platen size : 2000x20 Year(s) : 2006 Location : ASIA (China - Taiwan - HKG)
Price : On request
More detailsX axis: 0-90° Y axis: 690 mm Z axis: 100 mm engines: no tyre caliper rotation: yes caliper overturning: no Spr Year(s) : 2016 Location : EUROPE (Western and Northern)
Price : On request
More detailsFeeding mouth size: 480 x 260 mm Cutting Chamber Size: 480 x 230 mm Engine power: 11 kw Rotating Blades: 12 Fi Year(s) : 2006 Location : EUROPE (Western and Northern)
Price : On request
More detailsClearence between tie-bars:460 x 430 Screw diameter:50 mm Calculated shot volume:370 cm3 Min/Max mould thickne Year(s) : 1998 Location : EUROPE (Western and Northern)
Price : On request
More details10″ diameter 27 cutter single shaft rotor is driven by a 30 HP motor at 120 RPM. Has one (2) piece counter k Year(s) : 2007 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More details20″ x 28″ feed throat. 3 knife high shear open rotor with two bed knives. 50 HP 230/460-volt motor. Conveyo Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsMaterial that can be processed: PP, LDPE, HDPE, MDPE, HIPS Screw diameter: 130 mm L/D ratio: 40-1 L/D Output: Location : EUROPE (Western and Northern)
Price : On request
More detailsMaterial that can be processed: PP, LDPE, HDPE and MDPE Screw diameter: 130 mm L/D ratio: 35-1 L/D Output: Up Location : EUROPE (Western and Northern)
Price : On request
More detailsMaterial: • PP, PA, HDPE, thermoplastic, other • The machine is used to produce food packaging containers for Location : EUROPE (Western and Northern)
Price : On request
More detailsUS Tonnage 35 Shot Size (oz. of PS) 1.9 Screw Diameter 25 mm Platen Size 460 x 450 mm Tiebar Spacing (HxV) 280 Year(s) : 1996 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsUS Tonnage 730 Shot Size (oz. of PS) 114.85 Screw Diameter 100 mm Platen Size (in.) 61.02 x 61.02 Tiebar Spaci Year(s) : 2017 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsPlastics are polymerization products that can be formed into various shapes as needed when given pressure and heat.
There are also machines used to process plastics starting from plastic ore are: Single / twin screw extruder.
Machines used to mold plastics into a variety of common forms: injection molding, thermofoming, blow molding, etc.
Machines used to process plastics into special shapes: blown film, cast film, pipes and many more.
Majors brands such as Engel, Arburg, Krauss Maffei, Battenfeld, Demag, Nissei, Cincinnati, etc