Berkel GS180 Slicer Stacker & Conveyor

180D features a compact design with continuous feed
and synchronized 24” product tray that allows slices to be
automatically collected and stacked; unit automatically
shuts off when tray is filled
180GS allows slices to be automatically collected and
conveyed in a stacked or shingled configuration; machine
can be controlled at either end by a single operator;
Jygvgq
built-in controller permits instant change in the number
of slices per stack; stacks can be sliced in groups of 4, 5,
6, 7, 8, 10 or 12; shingling is performed in a uniform
stream of accurately cut and precisely placed slices;
slice overlap can be adjusted from 1/8” to 1-1/4”, in 1/8”
increments; conveyor and tubular stainless steel frame
stand come standard
1-speed, 1/3 HP, totally enclosed and permanently
lubricated knife motor
Furnished in 115/60/1, 7.2 amp, AC, ETL listed
Slicing speed is 50 SPM single loaf; 100 SPM double loaf
No-Volt release prevents activation of the slicer in
the event of a power interruption; operator must restart
the slicer
Base finish is gray Vitralon epoxy powder coat
Nominal 14-1/2” (368 mm) diameter, hollow ground,
hardened and polished forged stainless steel knife
The carriage handles food up to 9-1/4” (235 mm) wide, by
5-5/8” (143 mm) high by 24” (610 mm) long
Precise slice adjustment to a thickness of 5/16” (8 mm)
Built-in, top-mounted, two stone knife sharpener with
single lever, dual-action system
Permanent, rear knife ring guard covers non-slicing
portion of knife; attachable cleaning guard covers front
slicing edge of knife for added operator safety during
cleaning
Q-P-Q nickel plated transport slide rod for reduced wear
On/off, 3-position, moisture protected, toggle switch
Attached 6-foot, flexible, 3-wire cord and plug for
grounded receptacle