Menu

Black Clawson SIZE 3

Ref : 2194563-2-CP
Condition : Used
Manufacturer : Black Clawson
Trim : -
Type : SIZE 3
Year(s) : -
Quantity : 1
Location : Seller or machines location:
AMERICA North (USA-Canada-Mexico)
Last check : 12 Apr. 2023

Rebuilt Black Clawson Size 3 pulper drive, 4-1 Ratio by the following procedure.
1) Drive dismantled, cleaned by steam and sandblasted.
2) The interior of main housings painted with an oil resistant paint.
3) Inspect and record all critical fit dimensions.
4) All bearing housings restored to original dimensions as required.
Gear hub would be skimmed if required to eliminate runout.
Top housing pilot fit to pulper chamber restored as required.
5) New vertical ring gear shaft installed.
6) New horizontal pinion shaft installed.
7) New hypoid bevel gears, 4.00 to 1 ratio, installed.
8) New Timken bearings installed.
9) New shims, gaskets, seals, flinger and fasteners would be installed.
10) New Inpro mechanical seal installed in top vertical shaft housing.
11) New internal oil lubrication system installed.
12) The drive assembled with the gears set to the correct backlash and gear tooth mesh pattern.
13) New water flinger installed.
14) Drive spin tested and lubrication checked for proper flow.
15) Drive exterior primed and finish painted with green machine paint.
The rebuilt drive is covered by a one (1) year guarantee on workmanship and Delivery is approx. 12 - 14 weeks ARO.
material provided by MTR Martco.

Other machines similar to Black Clawson SIZE 3

6
Location : EUROPE (Western and Northern)
13
Location : EUROPE (Western and Northern)
Year(s) : 1989
10
Location : EUROPE (Western and Northern)
5
Location : EUROPE (Western and Northern)
Year(s) : 2004