Kautex, Krupp

1997 Krupp Kautex Model KBS 2-242/150 Coex 7S Multi Extruder
Continuous Extrusion Blow Molding Machine

This machine is in excellent condition and has primarily been used as an R & D machine,
it has less than 10,000 operating hours on it

$3,750,000 REPLACEMENT VALUE

- Head configuration- Single head, 7 layer continuous extrusion
- Head model number- CP-600
- Head tooling range- - Head tooling range- 240 to 450 m.m.- with a different adapter, tooling can be as large as 600 m.m.
- Press arrangement- single sided machine- after parison is captured, clamp and mold moves forward towards operator while another parison is formed
- Number of extruders- 6 (one extruder feeds 2 layers in 7 layer head)
- Extruder diameters- 2 @ 120 m.m.- 2 @ 70 m.m.- 2 @ 50 m.m.
- Extruder H.P.- 120 m.m. has 200 H.P. motors- 70 m.m. has 60 H.P. motors - 50 m.m. has 25 H.P. motors
- Plasticizing capacity-(HDPE)- 120 m.m. has 1012 pounds (459 kilograms) per hour each, 70 m.m. has 132 pounds (60 kilograms) per hour each, 50 m.m. has 106 pounds (48 kilograms) per hour each- total is 2500 pounds (1134 kilograms) per hour
- Clear platen dimensions- 59" (150 cm) wide- 63" (160 cm) high
- Maximum clamp open daylight- 78.7" (200 cm)
- Minimum clamp closed daylight- 31.5" (80 cm)
- Clamp force- 169 tons
- Clamp stroke- 47.2" (120 cm)
- Automatic part take out device
- Parison take out device
- Controls- Siemens
- This machine includes the following added features
1. Octagon System to balance material flow to extruders
2. Parison Wall Distribution System (PWDS) to better control resin distribution throughout the parison