Kellenberger 1000U

Height of Centers: 7.96"
Distance Between Centers: 39-3/8"
Maximum Table Travel: 51-3/16"
Traverse per Revolution (Coarse/Fine): 0.7876" / 0.0967"
Traverse per Dial Division: 0.002"
Hydraulic Traverse Speed: 0–19 ft/min
Table Reverse Minimum Movement: 3/32"
Table Dwell Time: 0–5 sec
Table Swivel Range: -8° / +13°

Wheelhead Travel: 8-21/32"
Infeed per Handwheel Revolution (Coarse/Fine): 0.16" / 0.02" (dia.)
Handwheel Division: 0.0002"
Micro-Correction Division: 0.0005"
Hydraulic Rapid Advance/Retraction: 1-37/64"
Hydraulic Infeed Range: 0–0.0396" (dia.)
Plunge Grinding Infeed Speed: 0.00001–0.0001" per sec
Traverse Grinding Incremental Infeed: 0.00004–0.0012"

Grinding Wheel (OD): 16" × 2" × 5"
Grinding Wheel (Face): 12" × 1-37/64" × 5"
Wheelhead Motor: 5 hp
Spindle Speeds: 1500 / 1700 / 2200 rpm
Wheelhead Swivel Range: -180° / +90°
Indexed Stop Position: every 90°
Internal Grinding Spindle Bore: 3-5/32"

Workhead Swivel Range: -30° / +120°
Workhead Spindle Speed: 6–600 rpm
Motor Power: 4 hp
Work Capacity Between Centers: 330 lbs
Work Spindle Taper: MT5

Tailstock Taper: MT4
Tailstock Sleeve Stroke: 1-3/16"

Electrics: 460V / 3PH / 60Hz
Machine Weight: approx. 6,500 lbs
Machine Dimensions (L×W×H): 106" × 64" × 66"

Hydraulic Tailstock with Foot Control
Digital Readout System
Internal Grinding Spindle
Belt Driven ID Spindle
Automatic Infeed System
Plunge Grinding Capability
Hydraulic System
Lubrication System
Machine Documentation