Menu

Mori Seiki FANUC MSX-711 IV MAPPS-III CONTROL 20000 rpm NT1000WZ (J) 7 Axis

Ref : 2180040-3-AW
Condition : Used
Manufacturer : Mori Seiki
Controller : FANUC MSX-711 IV MAPPS-III CONTROL
Spindle Speed : 20000 rpm
Model : NT1000WZ (J)
Nb Of Axis : 7 Axis
Year(s) : 2009
Quantity : 1
Location : Seller or machines location:
AMERICA North (USA-Canada-Mexico)

MORI SEIKI NT1000WZ (J)
2009

MAX WORKPIECE SWING: 14.57″
SWING OVER CROSS SLIDE: 14.57″
SWING OVER CROSS (TURRET2): 11.81″
MAX TURNING DIAMETER: 14.57″ (TOOL-SPINDLE)
MAX TURNING DIAMETER: 10.63″ (TURRET2)
MAX TURNING LENGTH: 16.69″
BAR CAPACITY: 2.05″
X1-AXIS (TOOL SPINDLE): 14.96″
Y-AXIS (TOOL SPINDLE): +/- 4.13″
Z1-AXIS (TOOL SPINDLE): 18.11″ = 6.10″ (ATC TRAVEL)
B-AXIS (TOOL SPINDLE): +/- 120 DEG
X2-AXIS (TURRET2): 6.10″
Z2-AXIS (TURRET2): 24.01″
C-AXIS: .001 DEGREES
MAIN SPINDLE SPEED: 6,000 RPM
MAIN SPINDLE MOTOR: 15 HP
NO. OF RANGES: 2 (WOUND ROTOR)
MAIN SPINDLE NOSE: JIS A2-5
HOLE THROUGH SPINDLE: 2.4″
MINIMUM SPINDLE INDEXING ANGLE: 0.0001 DEG
B-AXIS HEAD INDEXING: 0.0001 DEG
B-AXIS HEAD TOOL SPEED: 20,000 RPM
B-AXIS HEAD SPINDLE MOTOR: 7.5/5 HP
NO. OF TOOL POSITIONS: 38 ATC
APPROX MACHINE WEIGHT: 18,700 LBS

EQUIPPED WITH:
FANUC MSX-711 IV MAPPS-III CONTROL
B-AXIS HEAD
CAPTO C5 SPINDLE
LOWER TURRET EXTENDED TRAVEL OF 200 MM
LNS TURBO HINGE BELT CHIP CONVEYOR
RENISHAW OMP 400 PROBE SYSTEM
150 PSI THROUGH SPINDLE COOLANT
COOLANT FILTRATION SYSTEM
PROGRAMMING RESOLUTION BY 1/10
MICROCENTRIC CB65 HYDRAULIC CHUCK
TAILSTOCK TOOL (PICTURED) FOR TURRET PLACEMENT

Other machines similar to Mori Seiki FANUC MSX-711 IV MAPPS-III CONTROL 20000 rpm NT1000WZ (J) 7 Axis

2
Location : EUROPE (Western and Northern)
Year(s) : 2003
1
Location : EUROPE (Western and Northern)
Year(s) : 2019