Other Tension meter DTMB-500 Tension measurement using proprietary calibration formulas
AMERICA North (USA-Canada-Mexico)
Genuine German Schmidt cable tension instrument wire tension Instrument digital display tension meter DTMB-500
Precision Strain Gauge Sensing for Highest Accuracy
A precision strain-gauge sensing system accurately measures the force on the middle sensing roller. This is converted into a highly accurate tension measurement using proprietary calibration formulas which correct for material diameters, rigidities, gravity and other critical parameters.
Thickness Compensator Automatically Adjusts Calibration
The microprocessor automatically fine-tunes the calibration to correct for different material diameters permitting a single DTMB or DTMX to be used on a wide range of process materials without sacrificing precision or accuracy.
Field Adjustment for Fine Tuning of the Calibration
Increase or decrease the displayed readings in 1.5% increments or select Special Calibration (SP).
High-Speed Measurement Captures Max, Min & Peak Tension Values
Tensions are sampled 62 times per second and averaged over a user selected interval of 0.5, 1, 2 or 4 seconds. The maximum, minimum and peak values are stored for recall to the display.
Precision V-Grooved Rollers for Line Speeds Up to 5,000 m/min
Ball-bearing mounted, V-grooved rollers are hard coated aluminum for speeds up to 2,000 m/min. Optional High-Speed Rollers (U) are offered for 5,000 m/min. Hardened steel, ceramic and plastic rollers are also available.
NIST-Traceable Calibration Certification optionally available
Rugged Aluminum Housing For Long-Term Durability
Die-cast aluminum housing and surface-mount electronics insure trouble free operation in the toughest environments.
DIP switch for adjustment by operator e. g. display update rate
• Saving MIN, MAX and PEAK values during a user-selected period. These values can be recalled at the display.
Material thickness compensator: For better accuracy the material to be measured or a similar material with the same diameter should be inserted
Thickness Compensator Automatically Adjusts Calibration The microprocessor automatically fine-tunes the calibration to correct for different material diameters permitting a single DTMB or DTMX to be used on a wide range of process materials without sacrificing precision or accuracy.
Webs & Warps
Tapes & Bands