Used Finishing machines
1,929 resultsSubcategories
- Padding and impregnating machine (80)
- Polymerisers (22)
- Sanforizing (114)
- Shearing machines (170)
- Shrinking machines (18)
- Singeing machine (84)
- Tigering machines (2)
- Pleating machines (18)
- Relaxers / reduction machines (1)
- Accessories / auxilliary for finishing machines (83)
- Other machines for finishing (140)
1500MM ROLLER WIDTH Location : EUROPE (Western and Northern)
Price : On request
More detailsWorking width: 1 m 80 Consisting of: Entrance with J-box, steaming cylinder, stentering unit Rubber belt, fel Year(s) : 2002 Location : EUROPE (Western and Northern)
Price : On request
More detailsOutlet by folder. Load cell at exit Guider system Year(s) : 1990 Location : EUROPE (Western and Northern)
Price : On request
More detailsEntry castle with a pair of KF fabric handlebars 2 germinated PO 70 drying compartments Steam heating system Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsDouble jet burners, year 2003, working width 2 m, with J-box Brushing device, Impregnation department, winder Year(s) : 1998 Location : EUROPE (Western and Northern)
Price : On request
More detailswidth 1800mm in very good condition with COATEM Foam machines and Pleva weftstraithner extra spareparts -new Year(s) : 2002 Location : EUROPE (Western and Northern)
Price : On request
More details2x Lafer raising machines Double barrel height 1800mm. 1x Lafer raising machine Single barrel Height 1800mm. Year(s) : 1997 Location : EUROPE (Western and Northern)
Price : On request
More detailsCylinder width 1 m 50, each with 1 squeezer and 1 padder Year(s) : 2001 Location : EUROPE (Western and Northern)
Price : On request
More detailsFor terry and knitted fabrics Working width 2m20 , with suction Year(s) : 1998 Location : EUROPE (Western and Northern)
Price : On request
More detailsCylinder width: 2m40, working width: 2m10 Drum diameter: 600 mm, diathermic heating Year(s) : 2019 Location : EUROPE (Western and Northern)
Price : On request
More detailsCompacting line for knitted fabrics Belt width 2m40 With its small stenter and steaming Year(s) : 2007 Location : EUROPE (Western and Northern)
Price : On request
More detailsw.w. 1800 mm 7 bowls ( 4 papers and 3 heated ) hydraulic pressure, exit A-frame and 4 spare paper Rolls, steam Year(s) : 1973 Location : EUROPE (Western and Northern)
Price : On request
More detailsJapanese w.w. 1800 mm complet entry with J-box steamer box mini tenter sanforizing, palmer exit on plaiter Location : EUROPE (Western and Northern)
Price : On request
More detailsCROSTA type CMA special shearing machine working width mm.1800 – single spiral blade unwinding cylinders and Location : EUROPE (Western and Northern)
Price : On request
More details<b>1 x Rotary press calender SMIT type CLD ww 200 Cm</b> (heated:steam) in line with weft straightner BIANCO Location : EUROPE (Western and Northern)
Price : On request
More details1 x Shearing machine LAFER type C1C, 180 Cm, 2015 SHEARING Machine to cut the reverse yarn (jacquard process Year(s) : 2015 Location : EUROPE (Western and Northern)
Price : On request
More detailsroll width 1700 mm full overhauled year 2007 2 cylinders, polyammide and chromed chromed roll is heated by gas Year(s) : 2007 Location : EUROPE (Western and Northern)
Price : On request
More detailsComposed as follows: 1 double raising 1 double raising 1 lower raising/upper shearing 1 double raising 1 low Year(s) : 1996, 1997 Location : EUROPE (Western and Northern)
Price : On request
More detailsSANTEX OPEN COMPACTOR Type SANTACOMPACT 240 Year 2002 Steam heated 2,4 meters working width Pin chain entrance Year(s) : 2002 Location : EUROPE (Western and Northern)
Price : On request
More details2 hard chromed and polished rollers (dia 700 mm) max pressure 20 t with air pistons, min. gap 0,14 mm max open Year(s) : 1998 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsYear(s) : 2005 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailswith 1 desizing / bleaching compartment Year(s) : 1998 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsWorking width 500 – 1800 mm Steam heating 150 C Speed 100 m/ min Year(s) : 2002 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsWidth 180 cm Speed up to 80 m/min Year(s) : 1993 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsENTRY FROM A FRAME OVER AN INCLINED INSPECTION TABLE. OPERATORS PLATFORM MULTI HEAD SLITTING 20 PNUMATIC CRUS Location : EUROPE (Western and Northern)
Price : On request
More detailsYou can find used Finishing machines on Wotol
For second hand Finishing machines we have Coating Machine, Emerizing / Sueding / Sanding machines, Decatising machinery, Calender, Brushing machines, Compactor, Full factory / Line, Embossing machines, Laminating machines, Raising machines, Rope opening / slitting, Polishing machines, Padding and impregnating machine, Polymerisers, Sanforizing, Shearing machines, Shrinking machines, Singeing machine, Tigering machines, Pleating machines, Damping machines, Relaxers / reduction machines, Pile finishing machines, Accessories / auxilliary for finishing machines.
The main manufacturers for used Finishing machines are Kusters, Lafer, Mario crosta, Sperotto rimar, Bianco, Lamperti, Osthoff, Ferraro, Monforts, Ramisch, Comet, Santex, Corino, Torres.
The main models are PCL, KSB, GRI, SSC, MC, DSS/E, Calibra, Decofast, U80, VP, Comptex, Toptex, Monfortex,