Used Finishing machines

30 ROLLERS DOUBLE ACTION PILE & COUNTER PILE 1800MM ON THE CARD WIRE 20HP MAIN DRIVE MOTOR Location : EUROPE (Western and Northern)

Price : On request

Consisting of: Tension Bar Entry to Lattice Roll Guider to Operators Platform to Open Tenter 33FT long w/knit Year(s) : 2018 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

1 x Decatizing KD BIELA model KD Suprema 95 Location : EUROPE (Western and Northern)

Price : On request

Working width 2 m (cylinders = 2m20) 3 shearing units Exit on 1 inspection table 2 spare shearing blocks Year(s) : 1994 Location : EUROPE (Western and Northern)

Price : On request

Table width 2000 mm. Working width 1800 mm. 2 cylinders (1) chromed steel dia.410 mm. And (1) with Sinvex sle Year(s) : 2000 Location : EUROPE (Western and Northern)

Price : On request

2 CYLINDERS – (1 chromed steel dia 410 mm – 1 with Sinvex sleeve dia 600 mm) Prepared for 3 cylinders Table w Year(s) : 2000 Location : EUROPE (Western and Northern)

Price : On request

KD Biella Shrunk Roller length 2.000 mm Working width 1.800 mm Exit by plaiter Machine fully overhauled Location : EUROPE (Western and Northern)

Price : On request

Pentek Continuous Tumbling line for fabrics drying and softening in variable open width. Custom made in Italy Year(s) : 2017 Location : ASIA (South East)

Price : On request

YEAR: 1992 REFURBISHED IN 2021 WORKING WIDTH: 1800mm DOUBLE BELT LENGTH OF HEATING ZONE: 2000mm LENGTH OF COOL Year(s) : 1992 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

~300mm working width consisting of: Unwind Stand, 2" shaft. Holder 6.5" OD x 14.5" face with 2" wide locking Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Year(s) : 1996 Location : EUROPE (Western and Northern)

Price : On request

94” wide, with 2 driven scroll rolls, 94” wide x 4” dia., 2 covered rolls on the centering device with electri Location : AMERICA North (USA-Canada-Mexico)

Price : On request

WORKING WIDTH 2500MM ENTRY FROM TWO CENTRE UNWIND STATIONS WITH QUICK RELEASE CHUCKS FOR AIR SHAFTS OPERATORS Year(s) : 2007 Location : EUROPE (Western and Northern)

Price : On request

hot melt laminating machine (calander for coating and bonding) ww. 1800 mm, less used Year(s) : 2002 Location : EUROPE (Western and Northern)

Price : On request

WORKING WIDTH 2400MM CYLINDER WIDTH 2600MM DOUBLE FELT CALENDER STILL IN PRODUCTION Year(s) : 1996 Location : EUROPE (Western and Northern)

Price : On request

Coating with air blade, supported blade Working width: 180 cm. Location : EUROPE (Central and Eastern)

Price : On request

working width up to 3000 mm maximal speed 90 m/min. consumption: electric 31 kW, 380 V, 50 Hz gas: LNG approx Year(s) : 2008 Location : EUROPE (Western and Northern)

Price : On request

Year(s) : 2001 Location : EUROPE (Central and Eastern)

Price : On request

M-tec special shearing and finishing line used for fleece product ( consisting of 2x turbo shearing machines, Year(s) : 1998 Location : EUROPE (Western and Northern)

Price : On request

Working width: 1.700 mm Belt status: good Year(s) : 1999 Location : EUROPE (Western and Northern)

Price : On request

working width 2200 mm double drum, 24 + 24 cylinders for open width and tubular fabrics with cross rollers ful Year(s) : 2017 Location : EUROPE (Western and Northern)

Price : On request

working width 220cm Year(s) : 1991 Location : EUROPE (Western and Northern)

Price : On request

Year(s) : 1994 Location : EUROPE (Western and Northern)

Price : On request

Cylinder width 600mm but working width 400mm due to engraving of coating roll. Max speed 0+10 m/min. Max ove Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Working width: 2.400 mm Heating: Steam Electrical tension: 3 x 380 V 50 Hz Year(s) : 2001 Location : EUROPE (Western and Northern)

Price : On request