Used Pulp / Paper / Board Machinery
347 resultsFind by category
16' x 10' finishing broke pulper With 75hp drive and Goulds pump Allen-Bradley Model PanelView 1000 Control P Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More details60" Maximum Roll Diameter Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More details18' Diameter Pulper. Stainless steel Tub Comes with Size 3 Hydrapulper Drive and 500 HP Motor S/S 4:1 Rat Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsROLL SPLITTER Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More details52”wide Goebel Rapid D slitter rewinder. This machine was rebuilt with improvements to roll tensioning and Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsUp to 13.7 Tons/hr production 9.8 second no load cycle time Dual 30 HP motors 8" I.D. Bore x 5.5" Rod x 76" S Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsUpgraded Allen Bradley PLC 2023 9" Bore 30 HP Motor Year(s) : 2000 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsPilot/Lab 13.3" (340mm) 2-ply wide paper machine, Shut down 2024, still installed. Two ply 140 + 40 g/m2 400 Year(s) : 1982 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More details62" Wide Stanford Model 338 MCS Unwind diameter: 36” Integral unwind with 3" diameter air shaft. Fife P-50 au Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More details30 HP 6" CYLINDER Unit had Cylinder, Frame, and Other Parts Reconditioned in 2022 Year(s) : 2022 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsMax web width: 30" Unwind diameter: 30" Rewind diameters: 24" Razor slitting Differential rewinding Two motor Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsStill running Range width 5"-8.75" bottom 3.5"- 5.5" tube length 14.5"- 30" max speed B.P.M. 300 combined ba Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More details72" Used Dusenbery Model 335 Duplex Turret Slitter. Purchased in 2000. Two motor Eurotherm 590 Vector DC dri Year(s) : 2000 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More details80" ROLL SPLITTER Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsSingle screw dewatering press with the nominal capacity up to 20 TPD. Designed to operate on a paper fiber, Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More details1,000 FPM 72" ROLL STAND DIAMETERS 6 ROLL STANDS 67" PILE HEIGHT see in last photo: doc KMEC with specs and d Year(s) : 2007 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More details64" wide shaftless unwind stand, 60" diameter. Montalvo tension brake, 480 V AC, 15 Amps, 60 Hz Year(s) : 2003 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More details72" shaftless rewind 30" dia. bed rolls (8) Tidland Class III shear slitters Dual 100 HP drive motors, ABB ACS Year(s) : 2000 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsWORKING WIDTH 84" BED ROLL WIDTH Size 88" x 30" (223 x 76 cm) Equipped with two 150 hp (110 kw), 460 volt GE e Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More details100" Cameron Slitter Rewinder 60" rewind diameter, 3,500 FPM, 5- slitting knives, 4" slit width core 3,4,5,6, Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsCore cutter system, with hopper, elevator, autoloader and cut core table with waster divertor Year(s) : 2017 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsModel TW34A-DT-G-L05 Dual Turret, 2 Position, 600FPM (according to manual) , 32" Max Diameter Roll, 5 Hp Turr Year(s) : 1997 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More details43" Two Drum Rewinder Score cut; 1 1/2” min slit width 25 score knives 24” max rewind diameter 3” rewind shaft Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsModel 608 Shear and razor slitters Center/Surface Rewinding 24” Max. rewind diameter 42” Unwind Diameter 1000f Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsElectrical: 208 / 230 / 460 - 3 Phase 6" Cylinder 10 Hp Average cycle time appx 56 seconds Bale weight: 850-10 Year(s) : 2012 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsUsed pulp machines, tissue paper machines, board paper production machines, paper converting machine, paper finishing machines
You will find all types of second hand paper & board paper machines sold as complete or parts of paper machines, such as Stock Preparation equipment such as Pulper, Deflakers, Refiners, Screens, Deink & Flotation equipment, Washing, Dispersion, Headboxes, Fourdrinier table & Cylinder Formers, Wire, Press and Drying sections, Calendars & Super-calendars, Size Presses, but also spare rolls and many other equipment for paper production.
· You will find also all types of second hand paper converting machines, such as slitter rewinders, unwinders, Sheeter, sheet cutter, but also oll components for the corrugating industry, such as corrugators,
Finally, you will find all types of finishing paper machines such as tissue paper finishing machines ( tissue paper rolls, Napkin, Wipes & facial paper machines, paper bags machines, paper plates, stationery paper machines, and many other specialized finishing machines.
· Paper machine production, converting, finishing manufacturers are worldwide, mainly the USA, Italy, France, Germany, Japan and now China . Most companies have been through a wave of recent take over and company purchases
Major manufacturers and groups are Beloit, Voith, Black Clawson, Valmet, Overmeccanicca, KMW, Metso, BHS, Agnati, Jagenberg, Strecker, Pasaban, Strecker, and now many Chinese makers. but also especially for hygiene products Perini, PCMC, Bretting, Casmatic, Cassoli,
The Pulp and Paper Mills industry has experienced mixed results in recent years, as the global increase in digital media and internet usage have reduced the demand for various traditional paper products such as newsprint.
but the demand is switching to an increase of packaging product machines, and an increase on tissue paper dedicated machines: as an example, the global market for Tissue Paper Packaging Machines estimated at US$ 216 Million in the year 2020,with a sharp increase to expect.
Paper Is Big Business Today : the global production of paper and cardboard stood at approximately 419.7 million metric tons in 2017. More than half of that production was attributable to packaging paper, while almost one third was attributable to graphic paper.
- The gross revenue of International Paper in the United States: $23.6 billion.
- 20% of the world’s population today consumes 87% of the printing and writing papers that are produced every year.
- By 2020, the paper production section is expected to have increased outputs by 77% when compared to 1995 numbers.
The world's three largest paper producing countries are China, the United States, and Japan. These three countries account for more than half of the world’s total paper production, while the leading paper importing and exporting countries are Germany and the United States. Despite paper usage being reduced in North America, it is growing throughout the world.
· China and the United States are some of the top consumers globally of paper and cardboard products.
· China is currently the largest producer of paper and related products in the world, generating nearly 108 million metric tons in 2014.
While new paper machines are increasingly difficult to sell in their entirety, demand for support c( converting, finishing ) equipment and spares remains steady: . New and Used Stock prep equipment, pumps, screens, agitators, lab equipment, rolling stock, rewinders, and roll wrap machines are examples of equipment that can add value. All paper manufacturers have this equipment in mills, regardless of the product being made, widening its marketability. These components are more readily dismantled and can be moved at a reasonable cost. Beyond that, most mills have a significant inventory of spare motors and parts to ensure paper machines can continue running around the clock. Because most mills operate older machines, many of these transactions are being conducted in the used market.