Used Yarn manufacturing (sythetic, cotton...)

56 high-precision heads, suitable for both fine and bulky yarns Electronic drive system for rapid, accurate ad Year(s) : 2005 Location : EUROPE (Western and Northern)

Price : On request

92 SPINDLE PRECEION WINDER TYPE CLV/200 (DOUBLE SIDED) Location : EUROPE (Western and Northern)

Price : On request

NO. OF SPINDLES: 6 TRAVERSE: 10 INCH (25.4 CM) OUTPUT TUBE: 11 INCH (28CM) CREEL: 5 ENDS PER SPINDLE Year(s) : 1993 Location : EUROPE (Western and Northern)

Price : On request

60 position, with oil device update photons as attached the machine stopped at factory floor Year(s) : 2013 Location : ASIA (China - Taiwan - HKG)

Price : On request

1x SSM precision winder type DP1-W DIGICONE preciflex 15 positions, year 2005 1x SSM precision winder type DP Year(s) : 2005, 2012 Location : EUROPE (Western and Northern)

Price : On request

overhauled in 2018 for coarse yarn counts tubes until 450 mm length 24 spindles 8” traverse,conical tubes 3°3 Year(s) : 1979 Location : EUROPE (Western and Northern)

Price : On request

1990, overhaul 2018 with new control Becatron 4 bar, 150°C, capacity 7.200l diameter inside 1.600mm, length in Year(s) : 1990 Location : EUROPE (Western and Northern)

Price : On request

type Spirovap WPM/U, year ca. 1995 with 10 conveyors, perforated stainless steel tapes steam heated 98°C, vari Year(s) : 1995 Location : EUROPE (Western and Northern)

Price : On request

<b>1 x Croon & Lucke Z60C, ca. 1980</b> Double sided, Specification: For 5 Jumob.hanks until 3-4 kg each side Year(s) : 1980 Location : EUROPE (Western and Northern)

Price : On request

For 2 x 8 = 16 Jumbo-hanks until 3-4 kg, conic and cylindric, Circumference 1,60 – 2,30 m, width 200 – 400 mm Year(s) : 1985 Location : EUROPE (Western and Northern)

Price : On request

168 spindles, pitch 205 mm, pot-ø 157 mm, feeding: assembling cones 6-7“ delivery: 6“ con. tubes 4°20 or cylin Year(s) : 1991 Location : EUROPE (Western and Northern)

Price : On request

general overhault in 2008, 132 spindles, 6” traverse, pot diameter 185 mm, feeding: Year(s) : 1990, 2008 Location : EUROPE (Western and Northern)

Price : On request

Bauart 4.60, 88 spindles feeding: assembling cones 8-10”, delivery: 10“ traverse cones 270-290 mm length airth Year(s) : 1987 Location : EUROPE (Western and Northern)

Price : On request

2 x 36 = 72 spindles feeding pot-diameter 300 mm inside high 300 mm for feeding assembling cones 10” and 12” t Year(s) : 1987 Location : EUROPE (Western and Northern)

Price : On request

for Nm 10/2 until 75/2 turns/m 123-2800 160 spindles pitch 198 mm speed up to 12.000 t/min. – 24.000 twist tur Year(s) : 1999 Location : EUROPE (Western and Northern)

Price : On request

year 1996, Bauart 5.10 general overhauled in 2018, 144 spindles feeding: assembling bobbins 6-7”, tubes leng Year(s) : 1996 Location : EUROPE (Western and Northern)

Price : On request

type 2 x 36 = 72 spindles, ring-diam. 145 mm with 3 flange-bobbins each spind Year(s) : 1996 Location : EUROPE (Western and Northern)

Price : On request

2 x 12 spindles. 6“ traverse outstanding creel for 6-ply electronic sensors, speed 400-800m/min Year(s) : 1993 Location : EUROPE (Western and Northern)

Price : On request

6 spindles, 12“ traverse, cylindrical tubes 325 mm length diameter inside 72 mm, automatic doffer with outstan Year(s) : 1990 Location : EUROPE (Western and Northern)

Price : On request

6 spindles, traverse 250 mm cylindrical tubes Ø 72x290 mm assembling cones 4-6kg, metercounter, automatic doff Year(s) : 1994 Location : EUROPE (Western and Northern)

Price : On request

<b>1 x bobbin winding machine/take up winder, 2005</b> single sided, 72 spindles (4 x 18 spindles in 4 etages) Year(s) : 2005 Location : EUROPE (Western and Northern)

Price : On request

16 spindles 10”, tubes 1°50, 280 mm, splicer Loepfe clearer TK680 for Nm 0,8 - 10S-magazins for winding from Year(s) : 1988 Location : EUROPE (Western and Northern)

Price : On request

2 x 94 spindles pitch 150 mm ring-Ø 113 mm, tubes 450 mm 3 cylinders each side outstanding creel each side Year(s) : 1976 Location : EUROPE (Western and Northern)

Price : On request

16 spindles, 10‘ traverse = 250mm, tubes 280mm, 3°30, for hanks 1,50-2,00m circumference, until 1.000g waxing Year(s) : 1969 Location : EUROPE (Western and Northern)

Price : On request

21 spindles, 6”= 150mm traverse, tubes 5°57, 170mm length for hanks 1,20-1,80m circumference, waxing device Year(s) : 1985 Location : EUROPE (Western and Northern)

Price : On request