10 Others IVL Germination and climate cabinet
EUROPE (Western and Northern)
The well-known IVL germination climate cabinets have been widely used in various versions for many years. Almost all companies in Seed Valley (The Netherlands) have one or multiple on site.
All cabinets are built and tested in our own workshop (Wijk bij Duurstede, The Netherlands) and they comply with the applicable regulations. They are supplied as plug-and-play, with detailed documentation.
We can adapt the cabinet to your specific requirements by adding options. Energy saving can be achieved by opting for a version with LED lighting. As LED lighting emits less heat, there is a lower energy requirement for the cooling of the climate cabinet.
Specifications germination and climate cabinet standard model
Dimensions: 820x900x2050 mm (WxDxH), including wheels
Finishing of interior/exterior: galvanised steel sheet with 150 micron coating, colour white
Insulation thickness: 60 mm
Number of grids: 8 units
Grid centre-to-centre spacing: 150 mm
Dimension of grids: 530 x 650 mm (WxD)
Finishing of grids: stainless steel with polyester powder coating, white
Air-technical back panel: polyester-powder-coated stainless steel, white
Interior of the cabinet: polyester-powder-coated stainless steel, white
Cooling system: direct expansion compression cooling system, large-surface air cooler with centrifugal fan
Refrigerant: R134a (CFC and HCFc free)
Electric heater: stainless steel tubular element, power 250 W
Main voltage: 1 phase, 230V/50Hz
Connected load: 0.6 KVA
Power consumption including lighting: 250 Watts
Temperature range: without light +2/+40 °C, with light + 4/+ 40°C
Temperature accuracy as function of place: 0.2 K or better
Lighting: left and right a total of 4 TLD 36W HF 840, installed such that the released heat does not affect the temperature in the germination compartment Illuminance 2500 Lux with 4 lamps (When more light is required, the cooling system can be extended to 8 lamps)
Lamp colour: white 840, other colours on request
Control: Microprocessor controller. The clear LCD display and the soft keys combined with the clear menu structure enable easy reading out. Setpoints, clock times, limit values, alarms and other parameters can be set.
Protections:
• temperature and, if necessary, rv protection integrated in microprocessor controller
• 1 protection pressure switch for high and low pressure for the cooling system
Various options available
• dimmable fluorescent lighting
• LED lighting
• Humidification function up to 85% RV
• Drying function up to 15% RV
• more or fewer shelves
• glass viewing panel on front door
We are happy to provide you with more information or a quote. Feel free to send us a message.