10 Tug

Ref : 1756516-11-MT
Condition : Used
Manufacturer : Tug
Model : -
Year(s) : -
Quantity : 10
Location : Seller or machines location:
EUROPE (Western and Northern)
Last check : 10 Jan. 2020

Tug 660 Belt Loader

We have available 10 off Tug 660 Belt Loaders

The Tug 660 Belt Loader has the heaviest chassis in its class.

The TUG 660 belt loader assures years of dependable service in the most demanding ramp applications.

The central mounted conveyor is elevated at both ends by lift arms that are activated by single-stage, double-acting cylinders. The front of the conveyor operates at heights between 40 and 170 inches (1.02 and 4.32 m) while the height at the rear of the unit can be adjusted between 13 and 37 inches (0.33 and 0.94 m). The Tug 660 belt loader is equipped with belt controls operable from either end of the conveyor and an interlock prevents the engine throttle from being advanced for adjustment of belt speed unless the Direction Control is in neutral. A guide on each side of the conveyor assembly can be retracted if a clear conveyor surface is required. A collapsible safety rail is fitted on the side of the conveyor and an emergency hydraulic pump is fitted as standard.

Standard Features
• Recessed LED headlights

• Combination LED tail and stop lights

• LED back-up lights

• Automatic transmission

• All hydraulic hoses rated at 2250 psi

• Non-slip surface on fenders

Full Specification as below
Length 300″ (7620 mm)
Width excluding side bumpers 78″ (1981.2 mm)
Height 60″ (1524 mm)
Wheelbase 109″ (2768.6 mm)
Conveyor length less front bumper 294″ (7467.6 mm)
Conveyor width less guide rails 34″ (863.6 mm)
Conveyor capacity at full incline 2000 lb (907 kg)
Belt width 24″ (609.6 mm)
Door sill compatibility 40 to 170″ (1016.0 to 4318.0 mm)
Conveyor speed 45-90 fpm (13.7 to 27.4 mpm)
Gross vehicle weight 6800 lb (3084.4 kg)
Turning radius Chassis 260 “ (6600 mm)
Turning radius w/conveyor 300” (7620 mm)

Type Perkins 1104C-44 Diesel Tier II Water-cooled, direct injected, in-line, 4 cylinder
Fuel Diesel or Jet A (with additive)
Displacement 269 CID (4.4 L)
Governed rpm with full load 2400
Net brake hp at governed rpm 86 (64kW)
Torque at 1400 rpm 222 lb ft (302 Nm)

Type GM 4L70 Automatic Four-Speed Overdrive with a Mechanical Torque Converter Clutch
Diesel 3 forward, 1 reverse
Shift Control Shifter: SINGLE LEVER
Maximum speed 25-28 mph (35-40 km/h)

Drive Axle
Type Dana 60 Series limited slip differential
Gear ratio 7.17:1
Suspension Solid mount
Capacity 6000 lb (2721.1 kg)

Drive Shaft
Type Double universal, sliding spline coupling

Electrical system
Type 12 V, negative ground
Alternator 91A

Cooling system
Engine 15 qt (14.2 L)
Heavy duty radiator and fan
Transmission Radiator cooled

Fuel system
Fuel cell capacity 15.50 gal (58.67 L)

System Dual split system with hydraulic assist
Front Disc
Rear Drum
Parking Lever operated, drum type

Steering System
Type Orbitrol-operated hydraulic cylinder (hydrostatic steering)

Front 8.00 x 16.5 TUG TUFF
Back 8.00 x 16.5 TUG TUFF

Front Solid mount
Rear Solid mount

Hydraulic System
System pressure 1500 psi max
Filter Return line with element condition indicator
Conveyor Electric, hydraulic power unit to raise conveyor

Water temperature
Oil pressure
Hour meter

Other machines similar to 10 Tug

Location : AMERICA North (USA-Canada-Mexico)
Year(s) : 2000
Location : AMERICA North (USA-Canada-Mexico)
Location : AMERICA North (USA-Canada-Mexico)
Year(s) : 2000
Location : EUROPE (Western and Northern)