18-inch DSC "Shark" w/ 56-foot Dredging Depth

18-inch DSC "Shark" w/ 56-foot Dredging Depth

Length Over All (with ladder): 33.27 m 109-ft
Width Overall: 7.5 m 24.7-ft
Depth, Hull: 1.5 m 5-ft
Ladder Lenght:): 24.4 m 80-ft
Fuel Capacity: 8706 ltrs 2300 gals
Hyd. Tank Capacity: 2271 ltrs 600 gal
Dredge
Dredging Depth, maximum: 17 m 56-ft
Dredging Depth, minimum: 1.5 m 5-ft
Dredge Pump
Make: SPI/Mobile Pulley, Works, Inc.
Model: 16-FORM44-CB-LH-L-0/1-0-LS-0
Suction Diameter: 457 mm 18-in
Discharge Diameter: 457 mm 18-in
Impeller Diamtere: 1.1176 mm 44-in
Nominal Flow: 10300 GPM
Dredge Pump Reduction Gear
Make: Twin Disc
Model: MGX 6690
Ratio: 3.21:1
Prime Mover
Make / Model: Caterpillar C-32 ACERT diesel engine
Power @ 2100 RPM: 1350 hp
Cutter Module
Cutter Diameter: 1092 mm 43-in
Shaft Diameter: 159 mm 6.25-in
Cutter Rating: 149 kw 200 hp
Cutting Torque: 49,090 N-m 434,655 in-lb
Cutter Speed variable/reversible: 0-29 RPM
Cutting Force: 77.3 kN 17,386 lb
Cutting Force per Linear Inch: 111 N/mm 632 lb/in
Swing Winches - WN200
Line Pull - layer 1: 100.0 kN 22501 lbs
Wire Size: 19 mm 3/4-in
Drum Capacity: 176 m 576-ft
Line Speed: 30 m/min 100-ft/min
Ladder Hoist Winch - WN200
Line Pull - layer 1: 100.0 kN 22501 lbs
Wire Size: 19 mm 3/4-in
Drum Capacity: 176 m 576-ft
Line Speed: 18 m/min 60-ft/min
Spud Winche s- WN200
Line Pull - layer 1: 100.0 kN 22501 lbs
Wire Size: 19 mm 3/4-in
Drum Capacity: 176 m 576-ft
Line Speed: 18 m/min 60-ft/min
Spuds
Size (square): 610 mm 24-in
Length: 21.13 m 69.3-ft
Weight: 5.732 t 12,647 lbs
Electrical System
24 VDC for starting, convenience lighting, and controls
12 VDC (8 amp maximum) for convenience and user furnished radios
All circuits fused for protection
Two (2) engine batteries
60 amp alternator
Additional Features
Vented pump compartment
Rigid handrails
Rub rails
21m long spuds
Auxiliary Instrumentation
Toshiba Flow Meter
Pressure: Rosemount 3051.S Ultra style with 1199 diaphragm seal (process only)
3” block and bleed
5x6 Lever Room