4 Labconco Freezone 12
AMERICA North (USA-Canada-Mexico)
The Labconco Freezone 12 Freeze Dryer is built for a moderate workload in a lab,
with the ability to extract up to 12 liters of ice before defrosting.
To defrost this console freeze dryer uses a hot gas system with an auto shut-off at 60°C.
This 1-hp CFC free refrigeration system operates between -50° and -58°C, for best results ambient room temperature should be lower than 21°C (70°F)
This Labconco Freeze Dryer features a full color 5” touch screen, giving you real-time data
on collector temperature, vacuum level and allowing you to select from either a standby or run mode.
This command center will also show alerts, set maintenance settings, and level security set up.
The Labconco Freezone 12 Liter Console Freeze Dry System exterior is constructed out
of brushed stainless steel with a sturdy powder coat, and a stainless steel collector and coil system.
At the rear of this lab freeze-dry system is an RS-232 port for communication with a PC.
Data logging can be displayed in a table or chart format then exported.
Please note this laboratory freeze dryer is not to be used with samples containing acetonitrile.
Collector Temperature: -50°C, -58°F
Ice Holding Capacity: 12 L
Vacuum Pump Displacement Required: 98 L/Min or larger displacement
Vacuum connection 3/4″ OD
Weight: 200 lbs
Electrical: 230 volts, 60 Hz, 9.0A