90” L TO R X 75” F TO B Down-Acting Four-Post Hydraulic Press
AMERICA North (USA-Canada-Mexico)
Left to right overall is approx. 108” and front to back between the posts is 57”.
Nominal bed clearance is 90” x 75”.
There are cut-outs in the bed, front and rear,
that are approx. 48” x 12” allowing the operator to get closer
(approx. 50.5” F to B between cut-outs).
14” bore Miller cylinder with a 7” diameter rod and 48” max stroke.
Max daylight is approx. 88”.
Operator height is 29”.
Fully guided on 6” dia tie-bars with 21” bushings.
Two safety bars.
Several drilled and tapped holes in the bed and slide.
Relay control system.
Top-mounted hydraulic system: 40 HP motor (1200 RPM; 230/460 volts; 52 amps)
with a 50V109 Vickers vane pump
10 HP motor (1200 RPM; 230/460 volts; 29/14.5 amps)
with a pressure compensated piston pump rated to 3000 PSI
Vickers valves: approx. 300 gallon reservoir; approx. speeds:163 IPM fast close
4.9 IPM pressing
218 IPM fast open.
Overall dimensions approx: 108” x 80” x 216” tall.
Approx 60,000 pounds.