Biesse Skipper 130

Used CNC plate processing center
2 processing units (top and bottom)
82 individually controllable tools
NC Hops 6.0
Dowel aggregate
The machine consists of two processing units (top-bottom), equipped with a total of 82 individually accessible tools.

Workpiece dimensions:
Length: 90 -3,000 mm
Width: 70 -1,300 mm (0)
Thickness: 90mm

For workpiece dimensions larger than 2,500 x 1,000 mm
The machine can process in one-part mode.
For workpieces longer than 2,000 mm, the minimum thickness increases to 13 mm.

Working area of the tools: the dimensions -min. max.- refer to the tool axes Length (X).

Vertical holes: o - 3,000 mm
Horizontal drillings in X: o - 3,000 mm
Horizontal holes in Y: o - 3,000 mm
Continuous milling (with electrospindle): o - 2,500 mm
Non-continuous milling (with electrospindle): o - 3,000 mm
Continuous grooves (with saw blade) in X: o - 2,500 mm
Non-continuous grooves (with saw blade) in X width (Y): o - 3,000 mm
Vertical holes in Y: o - 1,300 mm
Vertical holes with "System 32": 32 - 1,076 mm
Horizontal holes in X: 1,140 mm
Horizontal holes in Y: 105 - 1,149 mm
Milling (with electrospindle): o - 1016 mm
Grooves (with saw blade) in X: 120 - 1,030 mm
Thickness (Z)90 mm

Processing units:
82 individually accessible tools, 41 from above and 41 from below
The two processing units are constructed in mirror image, each with the following configuration:

- 31 vertical, individually accessible drilling spindles, arranged in a 32 mm grid,
with drill holders (with grub screws) of which:
- 11 spindles in the X direction ("System 32");
- 3+3 spindles arranged in the X direction, positioned in two consecutive rows (min. Y working area 'O');
- 7+7 spindles arranged in Y direction and positioned in two parallel rows
- 10 horizontal, individually accessible drilling spindles, arranged in 'X+', 'X- and 'Y-' directions
with drill holders (with grub screws), of which:
- 8 spindles positioned in X direction (4 units with double output); 2 spindles are positioned in the negative Y direction.

Biesseworks Editor
Central lubrication
Teleservice
NC-Hops 6.0 machine license Skipper
Air cushion table

Right automatic transport with belt
lower processing unit - left slot:
A 4.5 kW (6 HP) electrospindle with ISO 30

Upper processing unit - Left slot:
A 4.5 kW (6 HP) electrospindle with ISO 30

Lower processing unit - right slot:
1 groove saw unit diameter 160 mm, right-hand rotation, 3.5 kW (4.7 HP)

Upper processing unit - right slot:
1 groove saw unit diameter 160 mm, right-hand rotation, 3.5 kW (4.7 HP)

Horizontal glue dowel driving unit: for dowels with a diameter of 8 mm
Barcode reader
- Spindle 8 & 9 defective.