Bobst SPERIA FOILMASTER 102 Hot foil stamping

32’600 running hours
Sheet size max 1020 x 720 mm
Sheet size min 400 x 350 mm
Embossing and stamping 1010 x 708 mm
Max. cutting strengths 250 T
Up to 7,500 sheets per hour, embossing and stamping
C.U.B.E. (Control Unit Bobst Electronic)
Manual non-stop feeder with antistatic device for paper or synthetics
Sensor-less double sheet detector
1 pull side lay mark o.s. and o.o.s.
Independent heating zones
Honeycomb chases
2 Stamping plates Centerline - Micrometric device
Foil break control system for 8 foils
Nonstop delivery by apron - 410 mm elevated - Platform

AUXILIARY FOILMASTER EQUIPMENT:
Foil Supply Module is equipped with 2 transversal advance shafts for 250mm (D-250mm) diameter foil reels. (J-5)
1 Additional foil driving device, "non-motorized", D-250mm

Including: 1 driving belt (30 mm wide), 1 automatic belt - tensioning system,
1 set of reel holder with 1" and 3" hubs, - 1 set of foil reel supports.
Maximum reel diameter 250 mm; minimal width 35mm.
Up to 6 driving devices maximum per shaft.
8 units are provided with the standard equipment - (J-6)
Independent foil driving system, "motorized", D-250mm

Including: 1 individual electronically controlled motor, 1 automatic belt tensioning system,
1 driving belt (30 mm wide), 1 set of reel holder with 1" and 3" hubs and 1 set of foil reel supports.
Maximum reel diameter 250 mm; minimal foil width 35mm.
Machine's electronic controls can manage a maximum of 6 different advances (shafts) during production. (J-13)