Brandt Optimat KD-99CF

Used Optimat Automatic Edge Bander - and with all related equipment.and...
PC-16 Program Control with a passive matrix 7.4" color LCD screen
8 Mb IDE Flash Disc 100 MhZ 486 DX4 hard drive
8 Mb RAM and internal modem for remote diagnostic link
motorized upper pressure beam for all work stations
large coil table (800mm diameter)
two motor (3 H.P. each) Joint Trimming Unit with cutterheads
automatic magazine for strip and coil feeding program
controlled pressure zone (first roller driven and four idle pressure rollers
Quickmelt Gluing System QA-34 with large granulate hopper
automatic glue feed system
infrared heating unit between the glue roller and pressure zone
End Trimming Station (two 1 H.P. motors)
program controlled pneumatic indexing from straight to bevel
Fine Trimming Unit #1 (two 2 H.P. motors)
horizontal and vertical tracing wheels
program controlled pneumatic indexing
Fine Trimming Unit #2 (two 3/4 H.P. motors)
horizontal and vertical tracing wheels with digital "Quickset" system and program controlled pneumatic indexing
Contour Trimming Unit (four 1/2 H.P. motors) with program controlled indexing
scraping unit with quick change heads and program controlled indexing
oscillating jump buffing unit (two 1/3 H.P. motors)
electronic frequency changer for all trimming motors and brakes
safety and sound enclosure
3 H.P. feed motor delivering a feed speed of 52 F.P.M.
electrical controls wired for operation on AC 3/60/230 volts
0.0016" to 205/32" edgeband thickness
1/2" to 2-3/8" edgeband height
panel thickness from 5/16" to 2-3/16"