Brandt PROFILINE KDF670

Edge banding machines
Furnishing:
- Quick-change quickmelt gluing part for hot melt adhesive.
- Automatic edge magazine with roller plate and automatic. Edge indentation
- extended inlet ruler, adjustable
- Heavy pressure zone (with Pgroamm adjustment) with a driven main pressure roller and 3 additional pressure rollers
- Motor-adjustable upper pressure.
- Control panel at the machine inlet.
- Electronic control PC 16
- Modem for remote service and remote maintenance
- Noise protection paneling
- automatic Chain conveyor central lubrication
- Interface for feedback (electrical) ZHR01/02/15

Aggregate equipment
- Separation agent information for the workpiece
- Joining milling unit 2 x 2.2 kW
- Cutting unit 2 x 0.35 kW, pneum. Chamfer/straight adjustment
- Milling unit 0-25 degrees, 2 x 0.55 kW counter rotation, for flush milling, pneumatically adjustable
pneum. 2-point adjustment Vertical feeler rollers
- Milling unit 0-25 degrees, 2 x 0.55 kW synchronous operation with radius milling machine
- Program adjustment side rollers
- Program adjustment to edge thickness
- Form milling unit above and below, 2 x 0.35 KW
- Scraper blade, pneumatically adjustable
- Surface scraper
- Cleaning agent information for the workpiece
- Buffing unit

Technical data:
Edge thickness 0.4 - 12 mm
Roll separation max. 3 x 45 mm
or 0.8 x 65 mm
Workpiece thickness 8 - 60 mm
Feed max. (*) approx. 16 m/min.
(*) When you select the shape milling machine, this takes place
automatic switching to 11 m/min.
Electrics 400 V - 3 Ph. - 50 Hz
Pneumatic connection min. 6 bar
Connected value approx. 17 kW
Total length 6,860 mm