Brausse ETERNA PE 1450 SE

Sheet Size Max - 1100x1450 mm
Sheet Size Min. - 1080x1420 mm
Platen Pressure Max. - 400 T
Production Speed - 5500 sheets/hr

Automatic die-cutter with stripping device
Each gripper bar can be individually shimmed to ensure very accurate and smooth sheet transport in case
of uneven chain stretching after years of production
Gripper bar locking levers can be adjusted by micro adjustment screws
Alloy gripper bars with a hard chrome surface made by special process
Radiator cooling for recycling toggle drive lubrication system
Catwalk with safety rail
Self diagnostic system with indication on a color LCD screen
Ethernet modem for online assistance by problems with electronics
CE standard safety systems for safe operation
Centre line system
Synchronizing device to adjust the sheet positioning to the front lay by hand during production
Suction head with several adjustment possibilities to handle different kind of materials
Patent turbo spiral air blower pressing foot at feeder head
Four pick up and six forward suck heads with angle adjustment
Fine air blast at lead edge for smooth thin paper transport
Feed in rollers combined with feed belt system, for better feeding of heavier materials or corrugated board
Sheet slow down device of feeder belts to assure accurate position of the sheet to the front lays (electro-pneumatically adjustable)
Bullet catcher on the feeder entrance
Side lays on both sides adjustable for push and pull and for paper and carton Frontmark control with adjustable density
Four individually adjustable front lays with dial read out at the operation side of the machine
Four electronic front lay controls by means of Omron Glasfiber Optik
Precision worm gear crank toggle driving system to ensure smooth and dynamic lower platen movement
Pneumatic push button die chase locking mechanism to ensure safe and operator friendly changing of the die
Pneumatic clutch/brake for main drive system
Motorized pressure control
Digital die cutting pressure tonnage display with adjustable pressure limit protection
High quality pre-stretched gripper bar drive chain
State-of-art 3 cam index gripper bar drive system to ensure smooth and precise gripper bar intermittent movement
Air blasting nozzle bar for stretching the thin paper before die cutting
Double cam driven gripper opener and front lay swing frame for smooth and accurate sheet register
Air blasting nozzle bar for stretching the thin paper before die cutting
Triple action movement of the upper and lower stripping frames with lower spring loaded stripping pins
Motorized upper frame suspending hoister and can be switched on and off electrically
Upper , middle and lower stripping tool drawer can be pulled out for job set up and make ready
Remote control operating panel for jogging the upper frame up and down, easy and safe stripping tool alignment
Complete set of stripping tools with upper and lower stripping pins 1 upper drawer chase
1 middle drawer chase
1 lower drawer chase
Automatic delivery with nonstop curtain.
This curtain moves into the delivery to catch the arriving sheets during the pile exchange
Rear and side joggers with easy position adjustment
Five section brush brake – brake force individually adjustable
One 7 mm hardened die cutting plates (HRC 45)
One die chase with quick locking system
One set of stripping tools including spring loaded stripping pins etc.