Campbell 800A Series

Campbell 800A Series
New – 2018


Work Envelope:
– Length…………32″
– Width…………24″
– Height…………24″
Axial Travel:
– X-Axis…………32″ + 8″ beyond table edge
– Y-Axis…………24″
– Z-Axis…………20″
– Rapid traverse…………300 IPM
– Positioning accuracy…………5 Microns
Table:
– Length…………32″
– Width…………24″
– T-Slots………….5/8″
Grinding Spindle:
– Run Out – radial & axial…………2.5 Microns
– Wheel size – maximum…………20″Dia. x 6″W
– Power – from 1,200 to 3,200 RPM…………60 HP
– Speeds…………0 – 5,000 RPM
Table Mounted Plunge Dresser:
– Run Out – radial & axial…………2.5 Microns
– Wheel size – maximum…………6″Dia. x 1-1/4″W
– Power…………5 HP
– Speeds…………0 – 5,500 RPM
Electrics – machine only…………460V/60Hz/3Ph
Coolant System:
– Capacity…………850 Gals.
– Flow rate – maximum…………60 GPM
– Clarity…………15 – 20 Micron
– Dimensions…………72″ x 168″
Floor Space – approximate – machine only…………9.5′(L-R) x 12′(F-B) x 10.5′(H)
Weight – estimated…………55,000 Lbs.

EQUIPPED WITH:
Fanuc Series 35i-MODEL B
180 Degree table indexer w/two fixture assemblies
SBS Balance System SB-5500
Dual supported plunge dresser
Chiller for spindle, table, and coolant
Linear servo drives
Servo positional feedback via air-purged absolute glass linear encoders
Campbell MVF-240-1600 coolant filtration system w/programmable coolant pressure
Full enclosure w/Royal Filtermist mist collector
Thermally stress relieved steel weldments