Coatem laboratory coating line equipped with a CT4 coating head

The machine looks like this:
You start with that Stork unit image004.jpg
The Stork unit does not run over the control of the entire oven, which has its own control.
The trick is to properly adjust the speed of the oven and the Stork unit to each other.
Then the inlet/ foulard coater image012.jpg (the part where the screen is attached)
You can also skip the Stork unit, then the full roll of cloth goes at the bottom of this section.
This section is also equipped with an IR field.

Then the oven image013.png
A chain with pin strips runs through the oven to keep the cloth wide - if you have a somewhat sturdy cloth, it is easier to let the cloth run freely through the oven and simply keep it under tension between the tensioning mechanisms before and after the oven.
The oven has a heater that works via thermal oil (an oil heater is also built in underneath).