Costa SA1 CT 1350

Wide belt sander
-width working 1350mm
-abrasive belt length 2620 mm
-thickness of the processed material 3 -160 mm
- oscillation of abrasive belts with photocells and blowing to clean the photocell assembly
- fixed working height of the table (adapted to work in a production line) 900 mm
- motors for lifting working units with gears 0.37 - 0.75 kW
- feed speed 4-20m/min
- conveyor belt with negative pressure, fan motor power 3 kW

And the unit
-C250 - a set with a rubber roller with a diameter of 250 mm and a hardness of 70Sh
- engine power 11 kW with inverter
- peripheral speed of the belt variable in the range of 3-16 m/s
- pneumatic belt blowing

II unit
-TB 32 - electromechanical beam (composed of a series of rubber wheels at 32mm intervals)
for reading the size and position of the workpiece
-TP 32 - pneumatic multi-section foot
-programmed for entry/exit time
- section length 32 mm, pressure control of each section, mechanical setting
of the presser foot to compensate for the wear of the graphite tape
-automatic presser foot pressure control
- engine controlled by an 11 kW inverter
- peripheral speed of the belt variable in the range of 3-16 m/s
- pneumatic blowing of the belt

support teams
-SB180 - Scotch-Brite brush, 1.5 kW motor
-SJ1- antistatic beam eliminating electrostatic charges
-SR - rotary nozzles for cleaning grinded elements (removing dust from the surfaces and sides)

control
-PCM - computer with a 15"LCD PCM-A monitor
-PCM -Costa Sanding Manager+LogicA -software