CWP SMX30CSF Maximum Stock Width = 30″

Max Thickness Capacity (Mild Steel) = 0.078″
Straightening Rolls = 7
Diameter of Roll = 2.75″
Center Distances = 3.25″
Line Direction = R – L
Electrics = 220/440V/60HZ/3PH
Weight (Approx) = 3,500 lbs

Housed on a unitized steel weldment cabinet
Cabinet has provisions for recommended floor lagging
Machined steel top plates and roller housings, 1″ thick
All rolls hardened and ground, set in anti-friction bearings
Upper straightening rolls mounted in a single bank for two-point adjustment
Roll adjustment transferred via chain and sprocket assembly to maintain parallelism
Power distributed to all lower rolls and entry/exit pinch rolls via two drive shafts and split gear train
Cluster gearing on pinch rolls ensures proper mesh through thickness adjustments
Heavy duty modulating drive system automatically regulates output speed
Non-contact laser loop control sensor synchronizes slack material payout
Loop control is adjustment-free
Controls include forward and reverse jog feature for material thread-up
Roller housings calibrated for repeat roll settings
Exit cascade rolls support straightened material in gradual arc
Hardened collars adjustable for edge guiding at entry
Stock roller guide directs material flow from pull-off type stock reels
Drive and power train fully enclosed
Unit comes with data plates, cautionary signs, and comprehensive operation and maintenance manual