Davis Standard 1/4″ Tubing Extrusion Line

Including the following equipment:

Davis Standard / Killion model KN-100 1.00″ 24:1 L/D extruder
having a three (3) zone electrically heated, air cooled non-vented barrel
at approximately a 39″ centerline height.
Gearbox is belt driven by a 3 HP D/C motor with SCR control.
Unitized temperature control panel has six (6) zones
of Eurotherm controllers consisting of three (3) zones for the barrel
and three (3) zones for the c-clamp and die.
C-clamp is mounted on the discharge.
Includes gravity feed hopper.
230V/1ph/50-60Hz input, 47 FLA.

Nominal ¼” diameter electrically heated tubing die.

Davis Standard / Killion medical tubing vacuum tank measuring 116″ long
with an 8″ x 8″ cross section. Stainless steel construction.
Two glass doors. Upstream and downstream adjustment
as well as up and down adjustment. Includes vacuum pump with 3 HP D/C motor,
water pumps, sizing fixture, and controls.
230V/1ph/60Hz input.

Davis Standard / Killion belt puller having a 2″ wide belt
with 22″ of contact length.
Powered by an approximate 1.5 HP D/C motor.
Manually actuated top belt.
230V/3ph/60Hz input, 10 FLA.