Farnham 1058-E ROLL FORMING MACHINE

FARNHAM 1058-E ROLL FORMING MACHINE

CAPACITY:
Overall Length of Rolls (actual length) 121" (3,073.4mm)
Minimum Radius 5/8" (15.8750mm)
Thickness 3/32" / 0.0938" / 2.3812mm

ROLL DIAMETER:
Top Roll 1.00" (25.4mm)
Bottom Rolls each 1.75" (44.45mm)

TOP ROLL LIFT MOTORS
Geared motor to screw located on each end.
Mechanical Counter for each end of Top Roll
Each motor with Electric Brake.

BOTTOM ROLLS:
Each with In/Out Adjustment and Indicators located on both end.
TIE ROD BED ADJUSTMENT to put slight bow in bed.

MOTOR DRIVES: Wired 440 volts, 3-phase
All Rolls driven thru Geared Box by 2-Speed Motor 1 & 2 hp. 440 volts
Top Roll Elevation Motors (Two) each 3/4 & 1-1/2 HP 440 volts

CONTROLS:
Roll Drive Motor Start/Stop Buttons.
Two Roll Speed in Forward/ One Roll Speed in Reverse.
TOP ROLL Up/Down buttons to adjust BOTH END elevation screws at same
time.
TOP ROLL Up/Down buttons to independently adjust EACH END
elevation
screws.
COMPLETE FACTORY SAFETY GUARDS
Dimensions Approx. 41"FB x 193"LR x 100" Ht.
Approx. Weight 8500 lbs.