Fisher Scientific 13-247-10 Hybridization Incubator

Ref : 2291097-18
Condition : Used
Manufacturer : Fisher Scientific
Model : 13-247-10
Short Description : Hybridization Incubator
Year(s) : -
Quantity : 1
Location : Seller or machines location:
AMERICA North (USA-Canada-Mexico)

Fisher Isotemp Hybridization Incubators are designed to process nucleic and protein blots derived from hybridization procedures.
Incubator heat is accurately controlled to precisely maintain the chamber temperature.
Temperature can be set between slightly above ambient and 85°C and is easily set by simple controls on the front panel.
A large, bright display shows actual temperature during operation.
The incubator features keypad protection, which prevents the set temperature from being changed.
This is useful when setting up a processing program where the unit will be unattended.
An offset temperature can be programmed to compensate for the actual temperature inside a typical sample loaded into the tubes.

Power Requirements:100 VAC ±10%,50/60 Hz, 120 VAC ±10%, 60 Hz, 230 VAC ±10%, 50/60 Hz
Small/medium unit: 3.4 A @ 120 VAC, 1.8 A @ 230 VAC
Dual unit: 6.8 A @ 120 VAC, 3.6 A @ 230 VAC
Ambient conditions:+16 to 40°C, up to 90% relative humidity, non-condensing
Temperature range:Ambient +7 to 85°C
Average uniformity: ±0.5°C at 55°C within the chamber; ±0.25°C at 55°C sample to sample
Heat-up time: 20 minutes from ambient to 65°C
Rotisserie speed: 5-15 rpm
Maximum altitude: 2000 m
Over-voltage category: II (IEC 664)
Pollution degree: 2 (IEC 664)
Exterior dimensions W x L x H (nominal) : Small: 18 x 16.5 x 17 inches (46 x 42 x 44 cm)
Weight: Small: 45 lbs (21 kg)

Other machines similar to Fisher Scientific 13-247-10 Hybridization Incubator

Location : AMERICA North (USA-Canada-Mexico)
Location : AMERICA North (USA-Canada-Mexico)
Location : AMERICA North (USA-Canada-Mexico)
Location : AMERICA North (USA-Canada-Mexico)