Gleason 27M Variable BEVEL GEAR TESTER

GLEASON 27M BEVEL GEAR TESTER

Specifications:
Distance from center of gear spindle to nose of pinion spindle (maximum): 26" (660mm)
Distance from center of gear spindle to nose of pinion spindle (minimum): 6" (152mm)
Distance from center of pinion spindle to nose of gear spindle (maximum): 18" (457mm)
Distance from center of pinion spindle to nose of gear spindle (minimum): 5" (127mm)
Offset of gear spindle above center of pinion spindle (maximum): 5.5" (140mm)
Offset of gear spindle below the center of pinion spindle (maximum): 3.5" (89mm)
Diameter of gear (maximum):
Bevel/Hypoid Gears w/ pinion below center of gear: 36.5" (927mm)
Hypoid Gears with pinion 1" above the centerline of gear: 34.5" (876mm)
Hypoid Gears with pinion 2" above the centerline of gear: 32.5" (825mm)
Hypoid Gears with pinion 3" above the centerline of gear: 30.5" (774mm)
Hypoid Gears with pinion 3.5" above the centerline of gear: 28.5" (724mm)
Pinion Spindle:
Diameter of taper hole at large end: 6" (152mm)
Taper per foot: 0.75" (19mm)
Depth of taper: 6" (152mm)
Diameter of hole through spindle: 5 9/18" (141mm)
Gear Spindle:
Diameter of taper hole at large end: 3 29/32" (100mm)
Taper per foot: 39/64" (15mm)
Depth of taper: 6" (152mm)
Diameter of hole through spindle: 2.5" (64mm)
Electrical Equipment:
Main Motor - 2 Speed: 7-1/2 / 3-3/4 HP, 1800/900 RPM
Lapping Pump Motor: 1/2 HP, 1800 RPM
Drive Spindle: 900/450 RPM
Floor Space: 68" x 69" (173mm x 175mm)
Net Weight: 7,000 Lbs. (3,175kg)
Shipping Weight, Boxed for Export: 7,800 Lbs. (3538 kg)