Gleason 726 REVACYCLE 1500 rpm gear milling machines

MILLING MACHINE FOR STRAIGHT TOOTH GEAR WHEELS
GLEASON 726 REVACYCLE


- minimum foot angle: 15 °
- maximum foot angle: 55 °
- maximum tooth height: 14.8 mm
- maximum width of the toothed rim measured at the foot line: 28 mm
- division range: 8-50 mm
- cone depth: 15.8 mm
- cone taper per foot: 15.4 mm
- bore with a cone: 57.2 x 77.9 mm
- diameter of the tapered bore at the large end: 99 mm
- hole diameter along the spindle: 22.3 mm
- knife head speed range: 32.6-49.7 m / min
- feeds (seconds per tooth): 2-3.1
- main drive motor power: 10 HP
- main drive engine revolutions (60 Hz / 50 Hz): 1800/1500 rpm
- hydraulic system motor revolutions (60 Hz / 50 Hz): 1800/1500 rpm
- coolant pump speed (60 Hz / 50 Hz): 3600/3000 rpm
- rotation of the chip removal motor (60 Hz / 50 Hz): 1800/1500 rpm
- floor space requirement (L x W): 320 x 221 cm
- the total weight of the machine 726 REVACYCLE: approx. 9 t