Hardinge FANUC 18T CNC CONTROL 5000 RPM CONQUEST T 42 2 Axis

HARDINGE CONQUEST T 42

Swing 21.2"
Machining Length 13.1"
Bar Capacity 1.625"
Power 10 hp
Max RPM 5,000 RPM
Turning Dia 9"
Tailstock No
Live Tooling Yes
Sub Spindle Yes
Control CNC (FANUC 18 T)
Dimensions 125" x 70" x 67"
Weight 10,000 lbs

SPECIFICATIONS:
SPINDLE
SPINDLE CONFIGURATION (ANSI): A2-5", 16C
ROUND COLLET (THROUGH CAPACITY): 1.625"
AC DIGITAL DRIVE SYSTEM
STANDARD: 15 HP
TORQUE RATING: 51.5 FT-LB
SPEED RANGE (1-RPM STEPS): 60 TO 6000
CARRIAGE AND CROSS SLIDE
SWING DIAMETER OVER UPPER WAY COVER: 21.2"
PRELOADED BALL SCREW DIAMETER: 1.259"
X-AXIS TRAVEL (MAX.): 5.31"
X-AXIS RAPID TRAVERSE RATE: 472 IPM
Z-AXIS RAPID TRAVERSE RATE: 630 IPM
Z-AXIS (DRILLING) THRUST (MAX.): 1,500 LBS
VERTICAL TURRET LIVE TOOLING OPTION
NO. OF STATIONS: 12 (6 LIVE OPT.)
HORSEPOWER RATING (AT TOOL TIP): 2.4 HP
TORQUE RATING (CONTINUOUS): 52 IN-LB
SPEED RANGE (1-RPM STEPS): UP TO 4,000
SPINDLE ORIENT: C-AXIS CONTOURING(.001 DEGREE INCREMENTS)
SUB-SPINDLE
SPINDLE CONFIGURATION (ANSI): A2-5"
ROUND 16C COLLET (THRU CAPACITY): 1.625"
MAX. ALLOWABLE WEIGHT ON SPINDLE
(INCLUDING WORKHOLDING DEVICE): 75 LB
MAX. DISTANCE FROM SPINDLE FACE TO
SPINDLE FACE: 13.270"
MAX. SQUARE SHANK TOOL SIZE ON
VERTICAL TURRET: ¾"
MAX. ROUND SHANK TOOL SIZE ON
VERTICAL TURRET: ¾"
MAX. DEPTH OF WORKPIECE INSIDE SPINDLE
(FROM SPINDLE FACE): 14"
AC DRIVE SYSTEM (30 MIN RATING): 5 HP
TORQUE RATING @ 1500 RPM BASE SPEED: 17.5 FT-LB
SPEED RANGE (1 RPM STEPS): 80 TO 6000 RPM
ELECTRICS: 220 VOLTS, 3 PH, 60 CYC


Equipped With
EQUIPPED WITH:
- FANUC 18T CNC CONTROL
- 16C COLLET SETUP ON MAIN AND SUB
- LIVE TOOLING