Heesemann LSM6

Grinding machine

Consisting of:
1 stand assembly to accommodate the transport bed with attachment option for 3 aggregates and 1 brushing device
1 transport bed with individual transport belts including radiation device
Driven by a 4.0 kW three-phase motor
Feed speed 5 – 25 m/min. adjustable constant working height 920 mm, adjustment to the different
Workpiece thicknesses (3 - 100 mm) by height adjustment of the entire machine head
Input of machine settings via numeric operator terminal, including display of disturbance sources, work piece throughput and feed rate.
Height adjustment via terminal.
Program memory for max. 20 programs
Values for motor speeds, grinding pressure, grinding start, grinding end, grinding edge intensity are saved and can be selected of the program is automatically set.
1 cross sanding unit
Abrasive belt dimensions: 5,400 x 150 mm
Belt speeds: 12 and 24 m/s
Drive power: 13/17 kW
automatic braking device, complete pressure lamella belt system, pneumatic belt tension, intermittent belt blasting device
2 longitudinal sanding units
Abrasive belt dimensions: 2,620 x 1,350 mm
Belt speeds: 10 and 20 m/s
Drive power: 16.5/21 kW
Automatic braking device, pneumatic belt tension, intermittent belt blasting device, automatic infrared belt control,
belt oscillation 100 mm with the appropriate grinding belt width, grinding belt in opposite direction
1. Longitudinal sanding unit, front deflection roller with a larger diameter and eccentric bearing for light calibration work,
working in parallel and counter-rotation, including additional suction channel with intermittent belt blasting device.
The pressure beams are used fully automatically in terms of time by means of electronic line control, depending on the set feed speed.
Automatic start-up of all drive motors by central start button (sanding belt speed pre-programmed).
3 pressure beams with computer-controlled selective pressure control system CSD
Stepless pressure adjustment of the individual pressure elements, for free multi-track loading, distance between the control rollers 16 mm,
workpiece tolerance compensation of up to at least 2 mm, grinding pressure adjustment via terminal
Arrangement of the aggregates: transverse/longitudinal/longitudinal
Working Voltage: 380V 50Hz
Paint finish: light ivory RAL 1015
Belt support and operating side: right
Operating terminal: right
1 brush roller unit
Diameter150mm
Drive power 1.5 kW
Bristle trimmingFibre
1 workpiece suction clamping system for the safe transport of small or coated workpieces, including an integrated fan