Holz-Her 1220

Upright / vertical panel saw
Used
Cutting area: 5200 x 2100 mm
Automatic feed of the sawing unit
Freestanding

The panel saw can be "programmed" for all standard saw cuts using a clearly arranged control panel on the saw carriage.
The rest then runs largely automatically, e.g. infeed and outfeed of the unit, braking, return to end position, etc.
The saw unit is moved both vertically and horizontally via a particularly robust chain drive.
The infeed and outfeed process is also carried out via a special drive with chain and worm gear.
These measures ensure a long service life and minimum susceptibility to faults!
However, the automatic system can also be switched off for those who prefer to cut individual pieces by hand.
The central control unit allows all desired movements to be carried out at the touch of a button.
2 different feed speeds ensure the right cut for the material.

Technical data panel saw 1220 (according to manufacturer's brochure):
max. clearance height 2200 mm
max. trimming height 2100 mm
Workpiece lengths 5300 or 4300 mm
max. workpiece thickness 80 mm
Saw unit power (S6 - 40 %) 4.0 kW
Saw shaft speed 4420 rpm
Feed power 0.35/0.55 kW
Feed speeds 12/24 m/min
Electrical connected load 4.6 kW
Dust extraction unit type 1304
consisting of Three-phase high-pressure blower 0.96 kW, 380 V, 50 Hz.
Air output 300 rw/h at 48 mbar.