Holzma HPP 350

Program slide speed:
Forward 90 m / min
Backwards 90 m / min
(in EU countries forward = 25 m / min)
Automatic pressure beam height control yes
Automatic cutting height, yes
Adjustable pressure bar contact pressure yes
Adjustable collet pressure yes
Completely sprayed machine table (saw body) yes
Angle pressing device
min. Pressure width 0 mm
Max. Pressure width
complete cutting length
Main saw motor 13.5 kW
Scoring saw motor 2.2 kW
Operating voltage 400 V (+10% / - 5%) / 50 Hz
Electrical connection value for HS motor:
13.5 kW = 20 kW
Working height 920 mm
Main saw blade 350 x 4.4 x 60 mm
Scoring saw blade 180 x 4.4 - 5.4 x 45 mm
Required air pressure 6 bar
Compressed air requirement 150 NL / min
V at the suction nozzle approx. 26 m / s
Negative pressure min. 1200 Pa
Exhaust air volume 3800 cbm / h
Extraction connection chip duct 1 piece 180 mm
Extraction connection pressure beam 1 piece 150 mm

BARGSTEDT TBP 200/43/22
Automatic vacuum loading portal for continuous loading of small and large format panels.

TBP200 contains the following components:
- 1 carrier
- 2 portal supports or archway
- 1 scissors vertical guide
- 1 suction cross member including 4 suction cups and 5 suction cups
- Protection of the system with a safety fence and safety light barrier

Material: absorbent and separable
Output from the first stacking location
(Depending on material): approx. 2 cycles / min
Placement accuracy: +/- 20 mm
Stacking height including base: 1800 mm
Portal height: 3080 mm
Clearance height for forklifts: 2400 mm
Operating voltage: 400 V / 50 Hz
Minimum hall height required: 3970 mm