Homag BOF 41 45 K
EUROPE (Western and Northern)
Weight : 6000
Control Woodwop
Processing size 4500 x 1300 x 200 mm
Table size 2800 x 800
Spindle 7.5 KW
Tool change : 12 compartment plates
TECHNICAL SPECIFICATIONS:
Workpiece length for BOF41/45 max. 4500 mm workpiece width
Max. 1300 mm for milling with a tool diameter of 20 mm
1150 mm for all units
Workpieces larger than 1150 mm must be placed at the longitudinal stops at the rear workpiece thickness
max. 60 mm with standard clamp
max. 200 mm with clamping templates (provided by customer)
The specified workpiece dimensions do not equate to the maximum possible processing sizes per unit - see separate table
Min. workpiece size depends on: clamping devices, workpiece surface and contour.
Working height of lower edge of workpiece 920 mm
Soil conditions must correspond to the foundation plan
MAIN SPINDLE 7.5 kW WATER-COOLED:
for HSK F63 - DIN 69893.
Incl. Room extraction for all tools and units.
Vector-controlled asynchronous motor 7.5 KW at S1, water-cooled.
Tool weight max. 6 kg inches.
Recording. Tool length max. 200 mm
Motor spindle bottom edge tool diameter max.180 mm for milling tools max. 200 mm for grinding tools
Frequency converter for electronic
Speed regulation. Speed range continuously programmable from 0 - 18000 1/min.
Full nominal power from 12,000 rpm.
When the speed is reduced, the performance is reduced accordingly.
Without tool holder and tools.
PLATE CHANGER 12 - TRAY
for tools and aggregates with HSK F63. Possible tool and unit configurations:
- 12 x diameter max. 130 mm or
6 x diameter max. 180 mm and 8 x diameter max. 70 mm
DRILL HEAD 12 SPINDLES
1 motor 4 kW, frequency controlled.
Speed selectable via program 4500/6500 or 7500 1/min.
zeFor vertical drilling, spindle extension stroke 50 mn. 12 drilling spindles up to max. 35 mm bore diameter
Each spindle can be accessed individually.
6 spindles in X direction, 7 spindles in Y direction.
Arrangement of the spindles in an L shape.
Spindle distance 32 mm
Drill total length 70 mm
Shank diameter 10x20mm
With clamping surface and adjusting screw.
Direction of rotation: alternating right-left rotation. Without tools.