Homag KAL 526/8/A3/25/S2

Double Edgebanders
Short Description:
Type of edging Thin edge, Thick edge
Gluing System PUR
Corner Rounding Unit
Combination Squaring Edgebanding Machine First and Second Pass
Max feed speed 32 m/min
Operating Units Right Side 8 nr
Operating Units Left Side 9 nr

Long Description :
Subfamily Double Edgebanders
Min. panel height 12 mm
Max. panel height 60 mm
Max. panel length 1200 mm
Min. panel width 220 mm
Min. edge thickness 0.3 mm
Max. edge thickness 3 mm
Max. forward feed speed 32 m/min
Belt with Dogs

Top pressure
Pressure with rubber belt
Panel support guides
with positioning by NC

Infeed panel alignment system
Infeed panel alignment system INFEED TRANSFER HOMAG TBL 100/45/20
No. Panel Sizing / Milling units Left Side 1

1
Unit pre-milling unit
automatic timed intervention
motor power 4 KW
r.p.m. 9000 RPM
Same technical characteristics on the left side
Edge coil magazine
no. positions 6

Gluing system
glue pot for PUR glue
premelter forPUR glue
premelter for PUR glue Nordson DuraPail
Roller set to press the edge
no. pressure roller 5
with positioning by NC
No. Edge Processing Units 7

1
Processing Unit end trimming
Constructor model HL86
no. motors 2
motor power 0.22 KW
r.p.m. 12000 RPM

2
Processing Unit top and bottom rough trimming
no. motors 2
motor power 0.55 KW
r.p.m. 12000 RPM

3
Processing Unit Corner rounding
Constructor model FK13
no. motors 2
automatic tool change
with positioning by NC
Max. machining speed 20 m/min
motor power 0.4 KW
r.p.m. 12000 RPM

4
Processing Unit milling hogging
Constructor model UF11
no. motors 1
with positioning by NC
Presence of spindle moulders on the left edging part
motor power 4 KW
r.p.m. 9000 RPM

5
Processing Unit edge scraping
Constructor model PN20

6
Processing Unit glue scraping

7
Processing Unit buffing
no. motors 2
motor power 0.25 KW

Spray unit
Units fitted on overtables
Control system Powercontrol PC22
Bar code reader
Safety standard CE mark
Total installed power 48 KW